Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Pull power from one battery for the relay coil and it works fine. Relay contacts are isolated from the coil.
I use one of those big red square boat switches under the hood for the stereo on my paintball tank.
What I plan on doing is adding a remote controlled relay placed out of sight. Same thought as you except even with a keyed ignition switch unless it is sealed all they need to do to bypass it is short across the terminals. Different story if the security switch is hidden. Just a thought...
Voltage drop is caused by current passing thru a resistance, in this case a low resistance connection or the internal wire resistance. Doubling the voltage source while keeping the load requirement the same means the current is cut in half. Using V=I*R and assuming that the low resistance...
Fuego,
My duece is just a bit SW of the Sams on 50. I will talk with the co-owner about hooking up with you if you wish.
I will see if we can get to the Feb trail ride (depending on paintball schedule).
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!