Recent content by cpallme

Exactly what av8rnik said^. I would love to have the optimal setup but my budget will just not allow it.

I will be sure to give him a call. Thank you very much!

Thank you for the tip. I will begin to do more research on here on what all is needed. Just wish there were better pull a parts in my area. I will keep looking. Good luck to you as well!

Av8rnik, I should have done more research on the turbo build threads. My apologies. I plan on an electric fuel pump in the next couple weeks anyways so I would probably go the mechanical lift pump delete route. And to answer your question, from what I understand it would more than likely be a...

First I would like to start off by saying that this is a project for way down the road, but it just fell into my lap recently and was wanting to get some feedback on the idea from those a bit more knowledgeable on the subject than I. As of right now I have very little knowledge and experience...

Few more. Sorry if any are repeated still getting used to uploading files

More pictures courtesy of Starlight. Any questions about the rigs you may PM him or hopefully he will post up a few details of each

Courtesy of Starlight

Any updates on the carrier from Nate's? I'd like to see it mounted up if possible

Without him I wouldn't have been able to get my m1009. Thanks Jeff!

With my batteries I just took the old ones into Autozone and they gave me a pair that were the same size with I believe 900 CCA. They weren't cheap but my m1009 being a DD I was in a pinch and wasn't able to do much shopping around. With the paint I say it's your call, mine was OD green with a...

My heater seems to work fairly well, blows hard and fairly hot air for the most part. I think the switch may be on the way out because the air will go from hot to cold at random intervals. I haven't gotten the chance to tear into it and see what could be the problem but while I'm down there...

As follow up, I did a little brainstorming and had a :idea: moment. I used the KISS method and realized i could just re-drill the hole for the window channel bolt to move it 1/2 inch closer to the glass. 3 seconds with a drill and have a perfectly working window again, now with new seals...

Don't want to hijack this thread but I replaced my brittle and almost non-existent window seals that I thought were causing the window to jump the track and leave the channel. However, even with the new seals it is still almost as if the window has too much lateral play and falls out of the...

I had friend of a friend's brother's shop do the R&R. Took about a week longer than it should've but for the $1150+tax that I paid for it and I can't really complain about the longer wait. I was told that was a pretty good deal for a complete rebuild? Correct me if I am wrong. Plus they changed...