Recent content by Grizzlypower2001

Just ordered the brass, I replaced mine a year ago with the nitrile, but it's seeping again. So.....round two, I will post later with the results. Sent from my XT1710-02 using Tapatalk

Do you use pri-d? I did my research and thought it was my best choice. However talking to another pri-d user, it seems that it creates a film or crust on items (in the tank). I had a fuel leak on my MEP-802 drained the tank and found the inside of the plastic tank has a sediment crust on the...

I was one of the lucky customers, I bought two sets, one to replace and one to have as an emergency. Well of course you wait till it's to late. I just want to thank you again, it's nice to have the parts in hand when needed. Sent from my XT1710-02 using Tapatalk

Wow, great job on it. I'm in the process of mouse proofing myself, bought the hardware cloth just waiting for the eighth day of the week or a 30 hour day. Thanks again for the pointers!!! Sent from my XT1254 using Tapatalk

Keep an eye on the hertz, bring it up couple points and try it again I had the same issue. Mine ran no problem 26 amps soon as I put like a 32 amp load on it the frequency drop down and it did the same thing that fell flat on its face. Sent from my XT1254 using Tapatalk

Thanks for the quick reply. Did the first load test today and she did good. The issue with the low fuel light did not return while working her. When I first got it I wiped the tank clean and remembered reading on these and did play with it while it was empty. It's mind boggling to me, never...

I have been reading and trying to find an answer. I never had an issue with the low fuel light, till today. I have run my 802 numerous times ( never more than a couple hours at a time) and getting it ready for a load test. It had just below 3/4 tank on the gauge so I topped it off with fuel, it...

I have to ask... What kind of covers did you make for the air intake grates. I'm currently wrapping mine up in a tarp, not sure if it keep moisture out or in[emoji848]. So far I removed one mouse nest and afraid there are more coming. Thanks, Erik Sent from my XT1254 using Tapatalk

Like Guyfang said, as long as it does what you need. I just a house with a pool, and was thinking of warming the pool water up during a bank test ( without anybody swimming). Heck I may as well send the heat to the pool instead of making it hotter outside. Thanks for your pics, I may go your...

Very nice, interested to see how it's permanent foundation does with sound and vibration. Can you post some pics of the water heater element load bank, I'm interested in making one myself. Thanks! Sent from my XT1254 using Tapatalk

Are they staying in PA, or are they out sourcing to other states? Sent from my XT1254 using Tapatalk

Well finally got to lighting up the gauges, wanted to color code the back lighting so the boss can relay to me what is what. I lit the fuel yellow, temp blue, and oil pressure red. Not to sure if the end result is what I like, may just stick with a brighter white. Sent from my XT1254 using...

Good question, I tried bench testing my IP's on a bench and had no luck. I bought one "out of a running engine" from eBay and two from a seized motor. I had an injector and a spare pump still no luck. Reading this post interested me to try again. I just wanted to test the parts for "working...

I was thinking that as well, if you look at their current auction of 802's, they are all lined up and covered in snow. To me, the pics looked very close, especially years 96 vs. 05 units, the fuel pump and sensors caught my eye. Sent from my XT1254 using Tapatalk

I agree, I would be Pi$$ed off after driving that distance. Where is the professionalism there, oh take that one. I guess I have been lucky, both times I dealt with GL, it's been a good experience ( In PA ). Thanks for the heads up. Sent from my XT1254 using Tapatalk