• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by osagehargraves

  1. osagehargraves

    Water Trucks... Mk23...

    I think you need to check the tank plate, but does not appear to a 4,000 gallon tank. I’ll bet it’s closer to a 2500 gallon tank. Sent from my iPhone using Tapatalk
  2. osagehargraves

    TM for M969a1

    Thanks, I should have explained what I needed is the one that shows the motor parts and diagrams, but I was able to find the one I needed by searching with the same phrase as you posted, so thanks a million.
  3. osagehargraves

    TM for M969a1

    Hey Guys, I've recently aquired a M969A1 Tanker Trailer for my Fire Department. I've search and cant find TM's for it. I'm sure I have over looked it but can someone help if anyone out there has one. Thanks
  4. osagehargraves

    M1078 Fire Truck

    How many gallons are u running on that truck. We have one and this is our second fire season with it, I've noticed most fire men love it or hate it lol. I personally wouldn't trade it for anything.
  5. osagehargraves

    m1078 conversion to brush fire truck

    Depends but do to lack of funding atleast around my area the guys at the stations are doing them
  6. osagehargraves

    M939A2 Fuel Pump Shut Off Wire......Motor wont Die, Help

    Ok just to follow up and let you all know what I figured out, I got the problem resolved. The solenoid tested bad, therefore I removed it and replaced my broken kill cable and have the truck running again. I was under the impression due to my lack of knowledge, or lack of paying attention to...
  7. osagehargraves

    LMTV M1078 Transmission Fluid Change To ATF Write Up

    Yes that's we are talking about, I used a silicone lube spray
  8. osagehargraves

    LMTV M1078 Transmission Fluid Change To ATF Write Up

    Great write up and very informative Thanks Our truck was also lurching due to the pedal hinge sticking. I lubed it up and problem fixed. It held the RPM's so slightly up that it was all but impossible to notice.
  9. osagehargraves

    M939A2 Fuel Pump Shut Off Wire......Motor wont Die, Help

    Ok, so I finally got to put a DVOM on the terminals. It appears I have no voltage to the solenoid on either wire, not the one that is suppose to energize when I engage the starter nor the one the that should stay energized with the battery switch. If just one was not work I would just trace...
  10. osagehargraves

    M939A2 Fuel Pump Shut Off Wire......Motor wont Die, Help

    Ok that a perfect explanation I understand thanks WillWagner, I'll check that out and let ya know
  11. osagehargraves

    M939A2 Fuel Pump Shut Off Wire......Motor wont Die, Help

    Ok guys I need a little guidance. Our Fire Department has a 939A2, we have had it a few years and have randomly had problems when we attempt to kill the motor by flipping the switches off, and it would continue to run. Therefore we would pull the emergency kill cable to shut it off. The...
  12. osagehargraves

    New from Oklahoma

    Welcome aboard and to the addiction from a fellow Oklahoman.
  13. osagehargraves

    m1078 conversion to brush fire truck

    Webrep, here are you some construction pics hope they help
  14. osagehargraves

    m1078 conversion to brush fire truck

    Great Job and Nice Pics. I really think these trucks are gonna be GREAT all around trucks for the fire service and the most versatile trucks so far that we have received.
Top