Recent content by Timber

I bought the parts to do this upgrade about a year ago but had to stop messing with the truck for a while. When you say you got the switch from LMC, was it this: https://www.summitracing.com/parts/ADO-D6283D ?

That's what I've been doing as well. I've had this truck a good while now so I want something more permanent.

Thanks. I have all the A and B-pillar trim + headliner, so I'm trying to use all factory parts. I'm going to borrow your LED idea though and put one in the base.

I'm going to add the factory dome light to my M1009. Does anyone know if the wiring harness is there in the roof or do I need to source one of those as well? Thanks.

Yes, that's exactly what it was on mine. Glad to see you reinstated and thanks for your help with mine. FWIW, don't bother with the LMC controls. The hot/cold slider and vent position slider feels cheap. Also the fan switch only worked intermittently. Looks good, but I don't think it will...

I went ahead and ordered it. I'll report back how it works.

I finally got in there today. The switch is bad, a few of the terminals on the backside are cooked and melted. The plug appears to be fine. LMC sells the whole assembly. Will those work with our trucks? It's part # 32-0638 on their website. It looks like the same one in the truck, but I...

I'm only getting current to one position of the plug and only in the high position. I looked under the dash at the switch and didn't see anything obvious. Later this week I've got to pull the bezel and cluster anyway so I'll get a closer look then. Thanks for all the help.

I didn't check resistance, just continuity. The backside looked like different sized stove burners so I thought if the connection still existed they were working. But like I said, I was winging it and haven't messed with one before.

I'll check it tomorrow and see if I'm getting voltage at the resistor plug at different speeds.

Only the plug failed? How does that happen? Short of physical damage or corrosion, which you wouldn't really expect either with it tucked up in the dash, you'd think the plug would outlast the switch.

I have not. I've started putting together a cluster of gauges to replace the idiot lights and planned to be "in the dash" maybe next weekend so I'll check it then. I'll be the first to admit my test might not have been correct. After looking at the resistor and thinking about it a minute I...

My fan only works in the high position, so I was told it had to be the resistor. I took it out and it was corroded badly but not broken so I cleaned it up and checked continuity. It tested good between all poles so I put it back in. Still no joy. Then looking at the plug I noticed I'm...

You should be able to get one in pretty good shape for that amount. At least in my area it would.

If you're looking for a reliable daily driver, you really need to buy one someone else has already gone through.