Search results

Iam installing a new Injection Pump in my 6.2 Diesel M1009. Not my first time but what need to know is if I can turn The crank without the pump installed in order to better align the top hole. They are off to the left and putting the pump back in is a crap shoot to hit the aligning pin and...

They are locks that you are missing, LMC might have them but the last time I priced them very expensive, I used s a stick to keep them from vibrating open....

In my 40 years of restorations Ive yet to see a USAF responsible agency tag for a M38A1, U. S. ARMY , USMC but never for the Air Force, do you still have it and could you take a pic of it

Yes ....

Thanks for the Info....

Where did you get the A-Piller Gage Cluster, Thanks

Would it be possible for you to post the process of doing that conversion to a duel band antenna.... 73 Scott

The data plate board will be green not blue, it was removed before painting, If you find the WILLYS plate behind the seat soak it in brake fluid you might get lucky, and it will take it down to the original white, Oh, and it might've been used by a CAP Squadron they painted a lot of them Strata...

Iam looking for the original straps , NOS part number 334675 , they have a hook on one end and a nut and thread on the other , I referenced LMC tank because I thot thry would have them but they only have the ones that are threaded on both ends...

I am in the process f replacing the fuel tank on my M1009 and I can't seem to find the correct straps that have the hook on one end and threaded on the other end, I checked LMC and they dont have them for a 25 gal. Tank, any help as to who has them.... Thanks Scott

O.K. here is what I found, the left side brake hose is kinked, so both are going to be replaced as soon as my NAPA gets them tomorrow morning, as for the pistons they seem fine no problem getting them pushed back in with the bleeder cracked open, if it is the kinked line on the left side I still...

No, its Dot.3 Plastic pistons, now thats a new one, never heard of that, both pistons are metal....

I've looked for an answer, but all I've found One side seizing not both at the same time any ideas of why this would happen, everything is new as of 2016 except for the Proportioning Valve, any help is greatly appreciated.... 73, Scott

GRC radios are called 'Boat Anchors' for a reason, I don't believe they were ever mounted in a M151 series vehicle, they weigh in at around 300lbs and were replaced by the GRC-106 by that time....

Just goole it's the same for the CJ-5 134cu. in. F-Head engine, try YoyTube for a video also.....73 Scott

As said not military, early CJ-5, if the body is in any kind of good shape, that means it has floors and hat channels that dont need to be replaced, it would be worth something to a collector of CJ-5's...

Wow thats a beauty, love the paint, what brand did you use...

Well when it broke I was at a show and it was in the down position or it would of been a **** of a time getting the things out of the back, Iam going to try to grind off the tops of the two pins on the arm lift that arm off too get too the last bolt and maybe MIG/TIG it back together, Ill let ya...

this one sez its GM and made in Mexico... NOS CUCV M1009 BLAZER NOS GENUINE GM TAILGATE REGULATOR 2540-01-158-8554

Well I tried that and no luck can't get the blade at the regulator, the top of the crank assembly is blocking it, it was a good suggestion just no luck, Iam looking at buzzing off the two pins on the arm and getting a new regulator, it prolly has been in the truck since it was built....