Search results

After spending the last several days trying to break down a set of A3 wheels I gave up and took them to a shop. Hated having to pay someone but my 3/4" impact wouldn't budge them, not even a 6 foot cheater bar. So the guy at the shop said they charge $30 to take old tires off and put new tires...

Just got done lifting the 1028 with 4" HD Tuff Country front springs and also used a zero rate to move the axle forward 1" for a total of 5" front lift. Went with 4" in the back with Tuff Country shocks on all 4 corners. Used 2" wheel spacers so I could fit 37" hmmwv tires and wheels. Passenger...

Bought a replacement bed for my 1028 to replace the flatbed thats currently on it. Bed is in great shape, but as expected came with no bolts. Anyone know off hand the bolt lengths, and do just the front 4 go through top and bottom frame rails? Looks like the back 4 just go through the top rail...

Anyone with a 1028 or 1008 could you measure your frames length from the rear spring mount back? I have one with a service bed that I want to put a stock bed back on, but I'm afraid the frame has been cut down. From back of spring mount to end of frame is 7 3/4".

Heading out Sat 6-7 in an empty 3/4 ton truck to SE MO, little town called Puxico MO. Can haul cargo or trailer anywhere close to that route. From there to Huntingdon TN on 6-9, and then back to Franklin NC flat towing a M1009, can haul cargo only. Anyone need anything hauled along that route...

Im looking to find out how many M1101s can be safely hauled on a 16' trailer. Also a picture showing how they were loaded would be much appreciated.

Searched but couldn't find the answer. Anyone know how much the 5th wheel hitch assembly weighs on a m931? Getting ready to pull mine in preperation for installing a deuce bed.

Want to start off by saying a big Thank You to bobr2004 and Scar59!!! They both made this trip much easier on me. :beer: Won a M931A1 out of Indy and finally made the 1000 mile round trip to get it this weekend. Bob (bobr2004) had picked it up from GL, inspected it, and stored it until I could...

Like to get a M939 exhaust stack and spare tire davit hauled from Jeff down at Camp Shelby to anywhere close to my location in Franklin NC. Wouldn't mind driving a couple hours in any direction to meet.

Planning a trip from Franklin NC to Indianapolis IN on 5/17, and will be returning on 5/18. If anyone needs anything hauled along that route let me know. Right now just taking a car but with enough stuff could move up to a van or truck.

Wondering if anyone could do an inspection and possibly pickup and store (less than a week) a M931 from the Truck Center at Indianapolis,IN. That way I can drive up on a weekend to get it. Was going to get with Indy4x4fab, but just saw he is not with us anymore. Anyone else in the area?

Recently moved to NC and it seems this state loves dipping fuel tanks. I want to resume using wmo, but don't want to chance a $2000 fine. Has anyone in NC applied for and recieved a blenders license? The only other thread I found on this got seriously off track and I didn't think it appropriate...

Anyone know if it is possible to remove the intake manifold without also removing the exhaust manifold on a LDT465? I am replacing my intake and dont really want to mess with taking the exhaust off if I dont have to. TM says to remove them both as a unit, but it has been wrong before so thought...

I will be heading to Ft Benning in an empty 3/4 truck from Franklin NC on Thur 1/10. If anyone needs anything hauled along that route let me know.

Stubborn pipe plug cracked my manifold!!! Been trying to get a pipe plug out for several days to install a cab heater. After numerous soakings with kroil, heating up with a torch, etc the vice grips still kept slipping off, rounding head in process. So I would grind new flats, and repeat...

Just found out I will be going to Ft Bragg tomorrow 12/27 to pick up a load. Will be leaving from Franklin NC with a full size pickup pulling an enclosed 5'x12' trailer, both empty. If anyone needs anything hauled anywhere in between let me know.

Im looking at a set of 4 - 14.00R20s for my bobbed deuce. Owner says middle tread is at 1/2 to 5/8, and outside tread is at 7/8. So what would the set be worth? Got him down to $400, or should I wait and get a set at 85% tread for $695. aua

Looking to get a toolbox and spare tire carrier from a 931 moved from Csm Davis's place in Hattiesburg MS to somewhere closer to my place in Franklin NC. Can drive to meet you if your coming anywhere close.

I am having trouble locating a decent priced heater for my truck, but found a nos heater for a M38 for $70. Anyone ever tried these in a deuce, and if so how do they perform? Would be mounted inside the cab, passenger side like the A3's and 5 tons. Any reason this wouldn't work? I know without a...

Recently aquired a bobbed deuce where the bed was cut to short for the frame, and ends about an inch or two before the bumperettes. If I keep it I really need to fix it as it looks very tacky this way. I have come up with 2 solutions, the obvious being cutting the frame back to fit the bed...