Search results

Final got my new starter. Just have to get time to install it and hope this solves my problem. I do hope this fixes it shure could use my blazer do not have anything to drive to work company took back there truck they had me in.

Does anyone know if you could use the power block by th radio tray mounts to run a 12 volt radio or cb, or should you run wires up front to the bats. Oh this is in my M1009. :razz:

Doe's anyone know where to get a slave cable or the ends for one. I am shure this would come in very handy at times.

Does starter 508433 replace a truck that has a original 24v starter on it? Who makes this strter.

Does anyone know what the part number is for a just a solenoid for a 24v none gear reduction starter like i have on my M1009

Doe's anyone know where to get a 24v starter soilonode for a m1009 starter. Found the short it was at the starter wire and the power. The stud is striped know though. So i need a soilonode.

Where can you find a starter for a m1009 6.2l 24v of corse ? And what is the part number. Can these be bought new from anywhere or our they not availible new ?

Both batteries where brand new two years ago and acording to the charger they look good. The only wire i moved is the power wire going to the starter. So i think i am going to start there and work my way back.

Well i finaly replaced the lift pump on my M1009 friday. Will i was replaceing the pump i was chargeing the front battery. I had hooked up the front batter once or twice to bump the truck over to get the fuel pump in. After i was finished with the pump hooked every thing back up to prime the...

I have a M10 ammo trailer i would like to trade for a nice m101a2 or3 to go behind my M1009. The trailer is all complete except for the fuse box. Which i have misplaced as of right now. Some surface rust but no holes. I have painted the inside of the bed with redoxcide primer. Will post some...

Does anyone know how much antifreez, motor oil and trans fluid goes in a M1009 with a 6.2 :?: I will be changing my lift pump and radiator out this friday and hopfuly changing the oil if i get her to run again. She has a bad lift pump?

Thanks guys this will help. What does that gasket look like for the mounting block. Is it the same shape as the pump gasket. Is this a spacer for the pump? :?

There is a lot of fuel at the lift pump itself.

Well i got home from work a little earlyer today. So i thought i would try priming the M1009 again. As soon as i saw fuel going in to the bottle i also saw a lot of air with it. Was almost foamy looking there was so much air. I am guessing this is coming from the leaky and bad lift pump. Still...

Well missed starting her up one day and now she will not start. Tryed to prime her again but the lift pump must be shot. All i get is a little fuel and air mix after cranking way to long almost ran the bats dead. aua

Is that a air ride seat in your truck ? [thumbzup]

What is evryone running in there 6.2 for oil? weight / brand

Thanks. I have a new ip pump just did not fill like swaping it in just yet.

Hey Lance might be interested if the price and shipping is not to much. PM me and let me know how much? shipping to rising sun md 21911. :mrgreen:

Does anyone know if the seal on the passenger side of the ip pump can be replaced without pulling the pump out. It is the seal at the bottom behind the leaver. Mine is leaking bad from there. :confused: