Search results

Thanks guys, got a little angry so I walked away for a bit ( learned a long time ago from my father "just step back for a minute and when you return it will go back together very easy" Wish he were still here. So I went to help a friend with his fuel filters and measured his and it was @ 3.25...

Installed the tranny today, after my rear main job and I am having problems adjusting the clutch. I read all the tm's on adjustment and followed the perscribed 3.25 measurement from the trans flange to the clutch bell crank then installed the clutch linkage and it seems the bell crank needs to...

After I painted it with 383 green, I thought about camo but When I was sandblasting the old carc off I noticed stars on the hood and doors along with the other tac marks on the hood, so after thinking, I ordered a set from rick larson ( great guy!! ) and put the truck back to it's origional...

The winch was included with some tents I got last year, I was surprised when I recieved the shipment of 10 gp small tents and another crate that had the winch inside. Brand New!!. I have to look at the model of the buffalo but since I work for a fabricator I have the equipment to purge any...

Thanks guys, and thanks for this site, without it I would have had a hard time getting her done. I just picked up a water buffalo and I plan on turning it into a bbq smoker.

[/ATTACH]Here are a few pics of my deuce. I just need to reinstall the tranny and away we GO!!! This truck started as a 71 WO/W, soft top, no heater in fair shape. Now, NEW winch from GL, Arctic heat, coolant heater, hard top, spin on oil filter, windshield washer, cab insulation, arctic...

I have a pressure bleeder I made, in other posts I read to only pump the brakes a little, just to let the air escape thru bubbles rising to the cap. I think it would be better to bleed thru a bleeder at the rear of the MC chamber. I will look at an old master to see if the plug at the...

While waiting for my flywheel to be resurfaced, I am moving on to my leaky master cyl. After reading every post I can find on bleeding the master cyl ( leaving the cap off and pumping the pedal) I noticed a plug on the bottom rear of my new master cyl ( right under the line) My question is...

The housing does not have a stowage spot for the drain plug. If anyone has one of these, pull the plug and put it in the glove box

I have the same condition. Seal came out no problem, but how far do you seat the new seal into the housing ? from the way I measured the seal can go another 1/8 . On another note, with these types of housings there are 3 holes drilled in the block behind the housing to let oil drain back just...

Thanks guys, I will take pics tomarrow of my progress, hopefully iI can get the flywheel off early enough after work to get it to the machine shop. While waiting for it to get cut I will do the rear main and tackle another leaky master cyl. Does anyone know of a thread size of the flywheel...

I am ready to pull the flywheel to be surfaced and while I have it apart I am going to replace everything from the rear main to the throwout bearing. I need to know if I have the right pressure plate. The one I took off has 4 fingers and has 8 bolts, the one I bought has 3 fingers and 12 polt...

I just aquired some deuce parts and I found some boxes marked crank wear sleeves the part number is5318-177-9340. It seems to be for the rear of the crankshaft were the main seal is. Anybody know what they are for?

Thanks all!!! Hopefully I can get started this weekend will post pics when I do it

Thanks I got a bunch of gaskets from white owl last fall so I should be ok, I just need the long bolts for the front mount and the ones for the shift bracket, I thought I would ask because I see a lot of people convert a wow to ww and I figured someone must have the size. But before I do...

Hello all I am installing a winch on my non winch truck and I have all the parts but I need some bolts. My question is, what size bolt do I need for the shift bracket to the master cyl? Also, should I use gasket sealer on the pto to trans gasket? Thanks

These are lock rings not split rims, I havent done them myself but watching the pros do these on const sites they look simple with the right tools and training. We should do a central NY get together this spring ( plenty m35's showing up @ here)

40 dollars for 4 This shop used to recap NDT's for the military out of Griffis AFB years back so they know about them.

swapping tires I see that you are in Saratoga, not far from me ( New Hartford) I had mine done at a truck tire shop in Utica very cheap. If you dont mind the drive, PM me for the tire shop. Are you going to single?

Fired up the Deuce tonight for the first time in a month or so to keep the batteries charged. Since it is dark out, I took a look under her and noticed some weepage between the rear of the block and bell housing. Could this be the rear main? no oil coming out of the fording hole on the bottom (...