Search results

I bought me a deuce to replace it (well at least on of them)

I won a m35a3 last week in wisconson said it was driven onto lot. so I plan on driving it off way off 520 miles to michigan. that is unless i can find somone to tow it. next question is there anyone in the sparta aera willing to store it in case it has a problem?

yes just pull it from the top vent (the one with the semi clear hose) then close valve when you get fuel. ALSO ANOTHER TIP If you do (and it sounds like you should)change your lift pump I used some string and pushed it along side of the pushrod to hold it in place untill I got pump in...

Here is how I found to work best atatch a vacum pump with a clear hose to top drain after filter is on and pump till you get clear fuel (like bleeding brakes) close valve and start. it works great for me. ALSO MAKE SURE IT WILL HOLD VACUM WITH DRAIN CLOSED one of mine would not and verry...

looks like Im sending it out. and that sounds like NO fun at all. so does anyone have an old one I can buy to take apart to see how it works?

OK Ive read the posts and searched the posts (for a minute or two) and my Question is has anyone rebuilt there own cucv injection pump? I was all in for buying a rebuilt one but now both of mine are being STUPID. Right now a duce is looking real good (trade?)

heres mine in place of the steice plug it is an auto meter unit came with sensor and wiring (sensor goes on alternator)

here are a couple things I have done that I havent seen here. 1 is a simple way to keep m1009 seatbelts from falling to the floor Velcro is goood. 2 I had a small rust hole in one rocker so I cut the entire center out of both of them orderd som 1/16 aluminum dimond plate shaped it then used...

Here's mine M101 a1 I'm shure I am not the only one running this setup

Here's a few from inside Tilt steering, tacometer, in dash sat nav. comfortable wheel, white pointers in gauges backlit in red (very nice look at night) green bedliner flooring, camo on dash.

Here's mine

Here are mine

Mine did the same thing only when driving down the road, water was coming from gate seal (new from lmc) not coming all the way to the top of the gate. yes it was coming in from the top corners. as far as the wiper there are chanels on each side that the glass slides up and down on and are...

this theory of operation has been a great help. all my glow plugs went out at the same time and I havent quite figured out why yet so I have a couple questions. 1. is the glow plug card reciving 12v. or 24v from the fuse box and sending 12v or24v to the relay. 2. the theory is refering...

thank you! this is the kind of info I can use.

two questions the banks kit comes with a 2 into 1 exaust is this necessary? (summit racing has kit with out exause for under $1800) also does the turbo make the truck any louder?

it was to be given the unfortunate name .........................FUCV sorry someone had to say it

reading this thread has been depressing. I have 2 1009s that I have spent countless hours and cash to get to look and preform as good as possible. in the last two weeks they have both had some problems that I figured were going to be rare. now I see maybe not so much. after seeing what these...

The dual tex(digi) is with carc the green is gelipsi. I like the flatness of the carc but it scratches VERY easy the gelipsy seems to be more tree branch freindly but is a bit shiney Its a trade off either way. I havent tried the rapco yet but it is about time for a new project.:D

Can anyone tell me what model rear end my M1009 has? I know its a gm 10 bolt with a eaton gov loc but I need to order new berrings and such. I took a drive around lake Michigan (1200 miles worth) and at the end I noticed a growl in the rear end so I took the cover off all looks good but there is...