Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Check all rubber hoses on the vacum lines its all 25 years old.I had trouble shifting from 2-3 lines were leaking.put new lines runs like new now good luck.
My M1009 came without the bracket hooked up & it broke the starter nose had to get anew starter & bolts works great. use new bolts & put the bracket on.:grd:
CSMS= Combined support maintance shop AUTO SEC. would be my guess.
Where we work we took the m1009 took off tow pintles use them for admin stuff bumper were on one side SCARNG other side csms-auto
That is one great looking ride.The only thing I see wrong is its not parked in my drive way.I wish my M1009 was like that I might get my wife to go out on date with me riding in 1st class.keep up the great work.I love Steel Soldiers Site.:grin:
Ok guys I Replace my gp relay & bypass the card with a push button & repalce my 24 volt gage.I have cycle plugs 2 times & it fires right up Volts run in the green area now.Thanks for all your help.also bypass the res block so i get 12 volts to relay.works great.
Thanks to all.Keep up the great...
when the truck starts the light went out. then came back on. its never done that in the 2 years i had it nor any M1009 i drove while in service. the temp was around 45F.
thanks
Hello SS
I just replace my glow plugs all 8 they were shot. now when I started it. the gp light stays on when the engine is running it goes off after 30-40 sec. I bypass the resistor on the fire wall. I hook up to the front battery. My question is why the light stays on after the engine is...