Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
If the air leak is so small that fuel does not leak out, it should still start and run, maybe rough, but it should run.
Why do you want to know the fuel line diameter? To replace it, or fix it?
If you can slightly pressurize the fuel tank, (less the 5 psi), it should leak and look wet at the...
If you don't orient the big battery cable on the starter correctly, it contacts the signal wire stud, and cranks up as soon as you touch the cable to battery, just as you described. If you put the wires on after you bolt up the starter. You can't see it. When you get your new starter, bolt the...
1st, It needs the Doghead Relay Mod.
I think both relays used are bad.
Sounds like other stuff is fried now because of it.
Your going to have to go get it, These type of repairs need to be done on home turf.
I had to spliced into my taillight for a license plate light.
Where do I find the factory trailor connector?
I think it has 12 pins.
That is exactly how I wanted to do mine.
Hey, make sure it is oil and not dirty tranny fluid. I had similar symptoms, and it was the front tranny seal (pump seal).
Also, if it is oil, make sure it is not coming from up higher on the back of the motor, and just running down and out of the inspection cover.
That is just my two cents.
Most 16.5 rims don't have the extra hump on the inside of the tire.
You are right, these do not make for very good off-road rims.
I have a very nice set too. They have been up on my shelf for 5 years.
Weld on beadlocks will only help this on the outside of the wheel.
"The Man" doesn't want you to export these, because the taliban is collecting them to take over the world!
I hope they read the Doghead Starter Relay Mod!
btw, just in case this doesn't read the way i'm thinking it, it is a joke...
My reference says one window from 73-80.
It is a different window for 81-87,(or 81-91 Blazer and Suburban).
I would bite the bullet, and get the right window first. Joe.
I thought it was a bad hose.
I replaced both pressure lines, and its still leaking.
I'm afraid its the gear box. Its dry on the top.
Here is a crappy pic.
Gimme yall's input please.
Yeah, the can is pretty rusty. Inside is really not that bad.
I plan on using that pour-in-liner stuff.
I'd like to use it for diesel, so should I paint a yellow strip around it and stencil "DIESEL" on it?
I use a newer red one for Gas.