Search results

Can you guys tell me what would be best Oil to put in the differentials. Also- any additives ??? how much will I need to service all 3 Diffs??? Coolant and Oil were like mudd!! I flushed the radiator 8 times - running the engine to operating temp each time before dumping-- - its happy and...

Does anyone know where there might be a TM on this subject- Also =- I ran into about 10 sections of the big heavy cable with plugs on both ends -- as luck would have it though-- all the cables are either 3 or 5 pins -- GRIEF- I need 4 pin- but still will need to figure out how to install the...

Does anyone know how to plug in to shore power-- Vehicle has a 4 pin receptacle but I'm not absolutely positive how to hook up-- sure could use a diagram- my welder / generator has a 4 prong plug - but I'm no expert on 3 phase and the such- any help would be greatly appreciated- my neighbors...

thank you very much for helping me-- i will definitely return the favor!!

that makes sense-- where is your switch located???? what does it look like--- ill bet that is it!!!!

Ok

Only made new thread on new subjects Sorry

I can tell already this 944 is going to be a money and endless time pitt!!! while she is in great shape-- little things are biting mostly time out of my life! here is another weird problem-- the push pull governor knob on the dash came apart on me-- problem was the cable came loose from...

319 you are the MAN!!! read the info you sent me-- guess what is up on top of the shop right where it belongs?? the whole canopy system!!!!!! thank you so much don't know if the tarps are all there and if so - probably no good-- but hopefully templates to stitch new ones -- does anyone have...

Thanks in advance for helping me-- I really appreciate your time -- I will learn the truck fast and post all i find-- also-- does anyone have detailed inside pictures of one of these

no i do not have any info on this truck-- just got it a couple days ago-- do you have a Batwing Truck?? I could use all the info you have-- any idea where i can get a canopy set up?? or-- maybe find the specs on the frame - then i could make the frame and the canvas pieces- i have an industrial...

does anyone have knowledge of the Canopy system that attaches to the raised sides on the Batwing- i just noticed the whole back end of the shop is hinged too- but can not figure out how it is to be raised up or what will support it - anyone have any ideas- also - does anyone have the canopy...

The Batwing is set up just like your wrecker! PTO is off the transfer case and instructions are - Trans in neutral - transfer case in neutral -- push lever behind drivers seat in corner of cab-- pull out governer on dash - shift trans to drive-- pull out throttle up to 2000 rpms-- Problem...

Sure am glad I ran across this site! Looks like a great site with knowledgeable people! Thanks for allowing me to join!! I did my homework and found a really nice Batwing 6k original miles and everything is intact and works Drove 260 miles to get it home- it's not that bad!!! Wish the seat...