Search results

My fault for not looking here before I ordered rims. In fact I did not know about SS found out about the board 2 months into my order. A Day late. I am very new to the green fever and the ins and outs but I am a fast learner. :wink: Any one here know where to get tire inerts for 16R 20 tires...

Yes in Eastern PA

i Got the O rings and siliconed them yesterday. I am putting together them now. I got a set together and will finish bolting after I get some sealer which I am off on a road trip soon. Thanks for help.

Tires are 16.00 r20

Auto supplies closing down for the weekend. What about using gasket cement like perimitex silicone cement on rims instead of bead sealant

These rims took forever, they are what they said they would be but not of craftsman quality. Rims were made used rims even this considered he could of used a grinder to remove the hammer and tire iron marks. Even the builder of the rims used a hammer to knock the SH*^ out of the assembly and...

where to buy bead sealer I will not be rock crawling so low pressure s not a problem. Where do you get bead sealer from?

I finally got my rims from USA6X6 six weeks when ordered must mean 6 months to them. I am mounting these rims on XZL tires on a shortened 5 ton deuce these rims are meant to be tubeless has anyone used a "tire insert" and do you need this tire insert ring as seen here on USA6x6 sight...

Re: RE: How to test if front axle is working I will check out the valve ontop of Trans. I have noticed that the air seems to hiss out from below the shifter(trans) until the air pressure goes over 60 psi then stops. When air is bleeding down it also starts hissing when air drops below 60psi...

I was out tonight moving my 5 ton which one set of rear axles have been removed and bed shortened. I was on some ice/snow. Moving in reverse one rear wheel was spinning but the front did noting ( no spinning) Very cold out tonight. I had moved forward up some icy hills in the past and it...

Imstill waiting on rims I paid for over 2 months USA 6 x 6 Im still wait on rims for my 5 ton 10 bolt pattern from USA 6 x 6. Is there anyone else who will make a 10 bolt pattern for the 5 ton for my XZL tires. Talk about lairs USA 6 x 6 every time I call they lie and tell me next week and...

Jim Thorpe show When is the show? Where is it t in JT

The truck didnt cost that much

pm sent Check you pm

Anyone have any leads as to where I might find a M66 ring mount for deuce besides a want add and waiting forever. Anything to look out for?

rear air The rear air line is caped. When chassis was shortened the line was cut and capped. It has no coupler there. I am going to get a coupler from NAPA as you mentioned. This sight has many helpful members and resources. In a short time you have helped me allot. I will follow some threads...

the front service should and does have vented dummy cover and no shutoff valve, and the emergency line on the front does have a shutoff valve. My hose is long enough to go to the rear of the truck but the rear air couplers have been removed. My deuce has been cut down to a single axle truck...

manual downloded Thanks for link :D

Manual for M54a2 Where can I get a manual for M54a2?

I could not be using the correct terminology on the sir horn. I am referring to the coupling that the air hoses hook up to just behind bumper and on the front of fenders.