Search results

Pugent Sound, used to scuba there few times a week. Head out the back gate from Ft. Lewis and hit the water, those were good times. My commander was a NAUI instructor, she got me hooked on diving to get away from all the trouble that young soldiers get into. Geoduck and crabs we used to catch...

MIND THE MESS, my truck is a work in progress as I'm working in the field with my truck :) In the corners of the CBC there are the bolts coming through from the roof from the topside Ring Pick Up points. I grabbed some Harbor Freight tie downs, drilled one of the holes a little larger. Now I...

mounted to shelf I found a board on the rig, painted it with a can of Walmart Bedliner. Cut it to fit as a shelf, it rests on the lip where the cab and the roof meet. I mounted my fan all the way to the left (driver) corner up under the board. While I was at it decided to add a stereo and...

I bought the same product, now just waiting to spray it in, how is it holding up for you? I wanted to do the underside as well as the interior... Did you notice a difference as far as sound or installation value? I was going to pull all the metal tunnels off and spray them both sides then re...

FYI, The truck is from a company, MREDEPOT, you can find them on eBay. I bought my 5Ton from him, GREAT person / company! ALL of their trucks they spray like that, always with the 850 MP BN on the bumpers. The beds, interiors bumpers etc... are all sprayed with the liner. Mine has held up...

I looked into this for my trucks, I've always been a LineX guy and have had everything from boats to truck beds done. My MV's I wanted to do myself, I came up with UPol-Raptor liner is the way I'm going to go. http://www.u-pol.com/product-cat/83/.htm I came across them in the jeep forums, looks...

I did the PEEL AND SEAL everywhere from up under the dash, floors, inside door panels, and rear panels. Covered the floor with a new Vinyl black . I love Black Vinyl in my trucks. Takes a little patience and a solder pencil. Once I found the way I wanted everything to lay and the vinyl was the...

hunderliggur, I never considered this, but I have a few inverters hanging around (24v) and a 12v from a semi. I'm going to give this a try... Are you using 12v or 24v? How has this setup been holding up? The white hose... is that air in or is that a drain? allenhillview, thanks for the...

It's always that part that craps out, too bad someone couldn't machine those out and sell them. I would pick up a few spares. Anything stronger then the OEM clutch part... Yea, K9Vic, the chrome bothers me. One day, I'm going to wait till the wife goes to work then crank up the oven and...

LMC truck carries them I have 4 Blazers, and 3 of them I had to replace the same thing. I picked up everything from LMC Truck. A little pricey, but where else are you going to go? http://www.lmctruck.com/icatalog/csb/full.aspx?Page=44 The NO. 6 part, clutch $20.00 is what kept going out on...

Brad, have a great time!

I installed the Donaldson muffler, one of the top 3 three BEST things I did. Huge difference, I clearly hear the whine of the turbo, it's great!

I actually just had mine delivered to me up here in North Dakota, to the rig I'm on. It'll be awhile before I can leave the rig to get to a town to track down an adapter to make it fit the deuce. The quality is excellent, can't wait to get it home to powder coat it.

poop, just saw you were in the CUCV section :( where is the delete button to remove this

http://www.steelsoldiers.com/showthread.php?6805-where-exactly-does-the-Boost-gauge-go-on-my-engine/page2

I have that same hitch on mine, did you go a different route?

that's how I got started :) first RC trucks, and they kept getting bigger, then decided to jump right up to a 5 Ton with 53" :) (2) 1/10 summits, (2) 1/16th summits, axial wraith, Losi Night Crawler. I was playing with them on our drilling rig till we got in trouble "NO MORE FRICKING TOYS..."...

Ford, I'm sure mine is waiting for me in North Dakota when I get back... I'm home right now... what did you use for an adapter from the 5" to 4" ? I'm home, so I can run to a store and take it with me when I get back to work. It's difficult to find things and on my schedule when I get up there...

Maybe, I'm missing something, this is my first Turbo. I understand the end result can be that the pistons melt. I thought it started from the heat generated from the turbo, which transfers over... I thought that's why we tie the egt into the turbo. Trying to learn :)