• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    Clutch disc, Throw out bearings and Transmissions???

    I have been trying to figure out where my drive train noises are coming from so hopefully someone can help. I have pulled out the trany again and I can find nothing wrong with my disc and pressure plate. Both are new. A couple of guys are saying the throw out bearing is bad and I thought the one...
  2. S

    Noise in drive-train

    I surfaced the fly-wheel, replaced complete clutch, changed transmission, and now I hear clanking or clattering when pushing the clutch pedal in. Can't tell if it's coming from the transmission, or the rest of the drive-train. I have the tunnel cover off when listening. Transmission appeared new...
  3. S

    Can PTO cause Transmission to STOP shifting?

    Long story short, my transmission was working correctly before installing the PTO and necessary parts. The PTO is new and I checked it over for any reason to malfunction prior to installing it. Once installed, the transmission would not shift correctly. I barely made it back into my driveway...
  4. S

    Looking for manual for 89' Refurb m35a2c

    The deuce I just bought has 1 master cylinder with 2 brake fluid filler caps, 2 slave cylinder airpacs, one on passenger one on driver. Was told it is a newer system in case the air system fails, so you still have brakes. Have looked through many of the manuals and cannot find anything to work...
  5. S

    Screeching Sound from Turbo?

    Screeching on the passenger side of the M35a2? I have started to hear a loud screeching for about 5 to 10 seconds when I start the truck. Yesterday the noise came back when I was stopped at a stop light and lasted about a minute. I turned around and headed home and it would come back...
  6. S

    M35a2 Flame Heater "Nozzle and Valve" Part Question

    Is there any way to take apart the "nozzle and valve" part on the flame heater? I know you can take off the 3 nipples but can you get inside to diagnose or fix a leak coming from the end with the c-clip? Once the c-clip is off I'm having trouble taking off the round cap underneath is which seems...
  7. S

    ? Bleeding brakes, AW32, Hydraulic oil

    Hello, I just bought an M109A3 and I'm new at this. The truck has a soft pedal. It's in great shape and I believe has low mileage and hours. My buddy and I where going to bleed the brakes, but where not sure what to use in the master cyl. There is a tag inside the door with the name of the unit...
  8. S

    Test Pic

    Testing a picture! Cheers [thumbzup]
Top