Search results

I got my lines from off road design. They are braided stainless. Very nice looking and the fit great. Brent

More than likely you will have to go to little falls minnesota or sparta wisconsin to get one. So far I have not seen any here in Iowa, only duece and halfs and five tons. Brent

If you need I can get you a key cut off mine and send you one pm your address and stuff. Brent

I think the states and goverment screw us enough. I just transferred a car recently and learned they raised the state minimum for plate to 50 dollars. So my car I was going to transfer was 50 instead of 25, so they are getting double the money that is outrageous. They just keep raising...

Also if that doesn't work your fuel pickup could be plugged. I put a clear filter back by the tank and it was going dry. I pulled the pickup and the sock was plugged in the tank, I had the same kind of problems you are. I changed my lift pump and injection pump for nothing. Hopefull that...

-10 here yesterday and was even a little colder last week. Mine wasn't plugged in and started right up everytime. I love my 1008. Brent

Dupli color stuff isn't bad either butt I don't know for sure on a match. You can get sem off of the internet as well.

I just pulled my extra m1008 on my 4000lbs car trailer to girlfriends moms to store it. With the trailer and load that should have weighed 10,000 plus the truck and my junk in it 6000 equals 16000. :-P It pulled fine but not real fast. I could do 55 easily except for when I hit a hill. Hopefully...

I also still use the factory fuel filter off a 83 half ton diesel.

I had the same problem. I just ripped it off and I run a cheap clear fuel filter before my elecric pump. It has plugged up 3 times from the junk in the tank. But it is easy to replace. I'm glad I didn't put a new sock in because it would be plugged by now. I wouldn't put a new sock in without...

I poured a tiny bit in mine a while back and it made a not so good rattle if you know what I mean. If you are looking to clean your intake runners and valves you can pour power service down the intake while it is running, but go very slow because it will make the engine speed up. Also tranny...

Mine is a m1008. It is right under the bumper on mine. I will try to get some pics some time this week. Brent

Didn't have to do anything with them it only mounts to the bottom so it doesn't affect any of that. You could get away without notching the inside pintle brace if you took the bumper off before doing the hitch. But with the bumoer on you can't drop the bolt through the hole. I just got the...

Here are some pics. The one underneath is kind of dark but I had to cut is so the bolt could come through the bottom of the frame. Brent

part number is cht-14082 I got it of ebay. It was the cheapest place I found it. It came up as class 4 on summit but on my hitch it has a v which is 5. Anyway I can try to get some pics tomorrow. I also forgot I had to notch the bumper a little but you wouldn't have to do that if you had a...

I used a curt hitch for a 86 chevy truck. It is a class 5 and mounts to the bottom of the frame. I had to cut off some of the pintle bracket on the bottom of the frame. also I had to notch the supports that angle into the pintle. But honestly if you have a class 4 hitch what do you need a...

I have a set I'm willing to part with. Pm me on what you are thinking for price. They are still in the bed let me know if you need pics. Brent

I would definately check the converter bolts. I have had them come loose and make a similar noise. Blue lock tite helps. Brent

Why couldn't you rent a 2 wheeled dolly and pull it with your pickup?

I have towed a 2000 pound car trailer with a 4000 pound 66 Olds toronado on it with a s10 Blazer with a 2.8. So I would hope you could do the same with a full size. As long as you are carefull and load you trailer right you should be able to do what you want. As far as picking it up. I would...