Search results

what ever one you can source for the least amount of money..

sorry to tell you that the whole front of the a3 is ugly as ****, rearranging the headlights are not going to fix that. I am going to do a whole front clip transplant from an A2.

I love my knuckleboom too, an extremely valuable piece of equipment:D

I label these as offroad use only due to insurance and liability reasons, I would have to run these through a DOT inspection etc. to claim they are hwy safe and I don't do that. That being said, I have ran these on my personal rigs for a loooong time and they run out true, smooth and very very...

No offense taken;)

If they are the ones you had when you dropped by they are different but I could probably convert the ones you have if I need to.

Yeah I know what you mean, I do all of these by hand and I start out with 8 1" stitch welds all the way around to ensure no warping will occur then I do my seam welds, if I had some sort of a spinning jig I still don't think I could do one continuous weld, they are welded both front and back and...

wheels up close. Here are some close up pics of the wheels that I am building. These are for a customer in Everett who is picking them up this weekend.

Air Dryer Well after doing the turbo compressor mod I developed a fluttering air loss problem coming from my air dryer, this prompted me to rebuild it since I had no idea how long it had been since it had been done. It is relatively simple, the dryer is a Bendix AD-2 and all of the parts were...

yep, mine does the same exact thing, or if I am too aggressive on my down shifting it will unlock if the rpm's get too high.

thats what it was, I knew it was not the same as the fmtv, Soni priced them out and they were like 20k new for just the tranny no electronics or shifters.

Hey guys what Jim (R Racing) was getting at was that you grind the bevel that faces the hub off completely as I did on the rears of my 920 and then the wheel will sit flat, luckily on the 5 ton you only have to do the fronts not the rears, and there are only 20 buds total instead of 40. Enjoy.

Mine was exactly the same as his, replace the battery's and then test the alternator.

If you stick with a 5 speed though I would not trust it to hold up to 300+ hp, I think the auto is the way to go, especially since the detroits only have two throttle position off and wide open the auto would make good use of the power ban. I don't think that what you are doing is that much of...

ooooh Jessica would be so pissed if she found out you replaced her already!!

Hey Jeff, I am glad the LEO's did not harass you after you left spokane, its kind of a game of cops and robbers here, they know I make them and for the most part they leave me alone, they usually stop me just to shoot the breeze about the latest build once in a while, sometimes you will get...

Marine corp trucks, the conversion was done as a retrofit and also included an air ride cab which was ridiculous by design, when half the cab is rigid mount and the other is air, not real effective. They are an allison 7050 hd I believe, the model # is military specific and is not available for...

Turbo Air Compressor Mod So this is an engine mod that does not have any engine performance gain but is a must for any owner of a 915-920 truck, for those of us who suffer with mediocre to pathetic air pressure recovery this is a great way to fix that. This used forced induction from your...

you can do it if you run bridge truck wheel assemblies.

The allison in the 915 has a final drive ratio of 1:1 the cat is a .87:1 if memory serves, maybe .83, anyways if you swap a allison from a 915 in you will be a 50mph truck tops due to the much deeper rear end gearing. I love my Cat tranny when it loves me back, when if fights me I want to drive...