Search results

Thank You. Truth be told I also think it turned out well. Its always been driveable. Just would prefer not to have to give a pump or two to stop. Calling Napa today, from what I read its a bendix Master Cylinder part #2232693 See if they have one or a rebuild kit.

I got my new style horn assembly yesterday. Took about 10 minutes to install. Perfect SOOOOO easy

Hi all bill in pa here. 1987 m35a2c. I bought new rubber window rubber molding. Its the stuff that when you close the door with the window up. The window hits the rubber molding with the formed metal. Does anyone have, or know where I can get, or does maybe some one reproduce the metal that...

I ordered the NEW version. will be delivered 10 to 14 day. WOW and they charge $18 shipping. No wonder the USPS is in the red.

Just had mine do the same thing. Turned over but sounded odd. Had batteries checked. One had 600 CCA of the 950 was rated for. The other was "9" yes '9"cca of the 950. Bought 2 new batteries. Word of difference. With a digital volt meter on a start up dropped to 4 volts

Thank you for the reply. I know the dazed and confused feeling. where did you get the new style horn from. I'll order it. this morning. ..

Sorry to post again. Does someone have a clear photo of how a deuce and a half horn button goes together? I have the wire through the column with the connector on the end. I have a horn kit but I have no clue how to put the pieces together. Maybe the updated horn button version is a better...

Got it working. Was a bad brake switch for the brake lights. Must of been shorted out. Onr terminal actually showed cotinunity to ground. That should never be if your passing 24 volts into the switch and 24 volts out on a two wire switch. Cleaned all grounds and signals working also. Now if I...

Hi Bill in pa here Im having some light issues. My turn signal comes on and stays on, NOT blinking. I have a good ground at the lights. signal switch and the blinker unit. I have power to the blinker, so Im thinking its the blinker unit not doing its thing. Any thoughts or help? Also have no...

I have not yet. If I give just one pump it gets hard and slows well. I have found that Boyce Equipment has one for $500. New in box. I will get it replaced. im off a couple weeks so I spend less.

Hi Bill in Pa. here. As you may know I have a 1987 M35A2C Dual circuit Master cylinder. As I said in a different thread I bleed my brakes and the pedal will firm up then fades away. Thinking its the master cylinder I'm going to get a new one. Question is. I've seen them from $70 to $170. Is the...

Yes I did Driver side air pack. then the passenger rear drive then the driver rear drive then the passenger front drive then the driver front drive Was better. Then did the passenger side air pack. then the driver side steer then the passenger steer feels harder but eventually drops, A quick...

Well ive bleed my brakes and the pedal gets real hard. Holding it though for maybe 15/20 seconds it starts to fall and goes to the floor. I have NO air bubbles and purple fluid from all wheels. I bleed the air packs and then each wheel. So now im thinking I may need to replace the master...

Mine is a 1987 USAF truck. Could see a ghost of the USAF on the sides of the hood. Got the brakes bleed today. Took almost 18 oz. of DOT5 just to top it off before I started the bleed. Now all purple DOT5 Bleed each wheel till ran purple. Seams to be a good strong pedal now. Now need to replace...

Bill in Pa. here. I have a 1987 M35A2C Has a multi fuel herclues whistler turbo. Bought it W/O Winch W/O Power Steering W/O Quad Cab. Now has all of the above.

Mine is a 1987/M35A2C Hercules diesel Not a cat. Im thinking mine is the end of the A2 and the beginnings of the A3. More like a "mutt". Nothing under my truck matches my brother in laws truck.

My cap is different than the one in the picture. The cap on my 813 was like the one on the bleeder. Mine is yellow plastic with a rubber cap hose clamped to it. while im asking.... Under the master cylinder is the air pack. There is also what looks like a air pac on the Passenger side. Is that...

Hi all. Bill in pa here. Need to bleed my brakes. I opened the brake master cylinde and this is what I got. The cup with all the bubbles appears to me to be either water in the silicon brake fluid or D.O.T 3or 4 mixed in with the silicone. The gray looking cup is where I added water and mixed it...

Well I got the seats finished today. Did the fronts yesterday and the rears done today. Went for a maiden voyage and all went well. If anything may need to bleed the brakes better. Was fine when pumped once.

Went yesterday Friday 4/25/19 got my seats. From a 94 Jeep Cherokee. Really nice condition. Either look green of tan depending on how the light hits them. Tomorrow I'll start the rear seats.