Search results

The axle ends look new no damage I think you guys are right the end caps have been torched to not engage

There was not one ounce of metal in there clean that way

Most of the seals look good bearings smooth no play only seal that is leaking is the inner on the axle housing

Hi gang Anyone seen this is there a reason or cause there is no damage to the spline on the axle shaft .

Here is my 5 ton getting its new wire harness thanks to comtac biz and new fenders

Your right I put this in the wrong location use to other forums . Thanks to SS EQUIPMENT and eastern equipment

Found a couple of suppliers .

Hi Guys I am in Need of Front Harness for a M813 I had a new one that cam with the Truck but it has no alternator Circuit etc I am now thinking it may be for a earlier 5 ton also no cold start circuit . Non the less Hope there is a source for a New drop in harness Cheers

I gave up on thinking about fixing this harness. Will install the new one .

that's:beer: Awesome

This is what I've put on my truck to loosen and torque the lug nuts. Cheap and easy .

Well I know not original but found this to replace the stock drivers seat.

Someone went to town on unpluging and cutting a couple wires. Groan

Worked on instrument cluster today . Will mount the Jake brake switches in the open gauge spot on a piece of checker plate .

I have my suspicion that I was loosing my brake pressure because nothing was attached to it and it was wide open ?

Mind my ignorance it's the top inlet if thats the supply side I am uncertain would be part #2 on the TM pic I attached

Here are a few more pics I took the check valve apart and pic of the new one and the TM page and part I think it is .

Having a closer look the check ball is still there and the spring blew out as you see it. They list that check valve in the TM. I found a replacement that will work

Working on replacing the master cylinder and Air pack and using the TM. I am having some issues with the air fittings that go to the air in specific the one in front of the top bleeder mine seems to have had a check valve in it is this right or like the TM shows only a 90 . Or is that Part...

My parts I ordered have started showing up . Sad to Say the packaging was lacking and some parts where crushed < and Bizarre that the bendixs stop switch new was assembled with the Wrong nuts to Hold the connectors in it ... Non the less I am not knocking the Company just long waits for me to...