Search results

I'm going to edit your above post to show the pics rather than the photobucket links. We would rather have the actual pictures on our forum. This way down the road when the links go dead or change the pics will remain useful for others to see.

Welcome aboard!

Leaving it off.

If the spacer/adapter on the back looks kind of like a cone it's probably the tail shaft bell for a 2WD. If it's short and flat on the back about the same diameter from start to finish, it's probably a transfer case adapter.. But, as Warthog said, being a '94, it is electronically controlled...

I should be finishing up my 700R4 conversion today. It's not a project for the faint of heart. At least it wan't for me. The more I dug into the truck, the more i found wrong. But It also gave me a change to fix those things that were wrong. I've been told that the worst thing for the R4...

Well tie me up and throw me in the chicken coop. It works!!

Delete the insert image?...lemme test from above!

Just as I suspected....it only inserts pics.

Inset pic test

Just a picture test

I just posted it!

This project is FINALLY coming to a close. Today I made the trip NAPA to get the replacement TV cable and the transmission cooler hose. Came home and installed the cable in about 5 minutes (It's scary that I am getting that proficient at putting these things on). Then moved onto the...

I can't say enough good things about Kenny. He is the reason that the "Road Oiler" is going to have overdrive tomorrow!!!!!!!!! Without the necessary hard to find parts, I don't know what I would be doing.

Why does the IP need vacuum? It would be nice to just get rid of all of it. Can I do away with the block and hook the pump directly up to the IP? Here are some snaps of the TV cables and you can see that the one is clearly longer than the other. I also tried to get a pic of where I broke...

The vacuum pump being in the back where a distributor normally would go makes sense. Once it comes to the front of the engine into that little "block" by the IP, What it the purpose of the block and do I need it any longer?

I'm beginning to wonder if I'm every going to get this project done!!!!!!!!!! I started out this morning by calling my local NAPA Auto Parts Store, talked to Rusty and ordered the TV cable. He said they have one in Columbus, I can have it for you by about 1:30 or so...Excellent, get it here...

I do, yes.

WARNING TO ALL DO NOT BUY THE TV CABLE FROM ROCKAUTO.COM FOR AN 84 K5 Blazer w/ 6.2L, IT IS THE WRONG CABLE!!!!!!! I bought the cable from Rockauto and it is the wrong cable! The ACDelco part number of the cable they say fits the truck is 25515598....IT SHOULD BE 25515599. The cable from...

It's a good thing I decided to research and look into the TV cable situation for the conversion. WARNING TO ALL DO NOT BUY THE TV CABLE FROM ROCKAUTO.COM FOR AN 84 K5 Blazer w/ 6.2L, IT IS THE WRONG CABLE!!!!!!! I bought the cable from Rockauto and it is the wrong cable! The ACDelco part...

I guess the document was put out by TCI, but it has everything you wanted to know about the adjustment. This isn't Westy we're talking about here!!!