Search results

Adjusted linkage I did adjust the linkage. It seemed out of alignment. Had high hopes. Still same problem. Goes in 4wheel.....for a short time. Then seems to pop out....rgrggrgrgrgr. SO now I'm mulling what to do....I guess I'll price the shops first, what will it cost for rebuilding...

Hmm I thought I read not to run it in 4Wh drive with the hubs in free... Not sure why...

One day wheel drive goes GRGRGRGRG I think My Transfer case might be doing what's talked about here. One day ok. Then next not....grgrgr (Grinding noise like gears arnt going in) After it did this I played with it a little. It would go in gear for a few seconds Mayby 5 seconds. Then...

Maybe I should have added Engine seems to run fine when warm... Tuff news to swallow.....if those other things are going bad..

White smok from passenger side only... My first winter with my M-1009 so When It got below freezing I paid attention to starting..... Once engine starts white puff of smoke comes from passenger side, but not drivers side.... Engine runs a little ruff , Like a gas motor might with a dead...

Its was too dark by the time I had a chance to take engine container apart...but I will post pics! What should I take pics of to ID what I have? I did see a tag that said engine was from 1990.... Red tag on container said "Engine Knocks" I have $177.75 in it from auction + $75 in E-85 to...

June M-1009 My M-1009 (From MO) was in great shape, small issues. Windshield washer, rear window crank, door hinges worn out (Duh 25 yo truck). It had been serviced regularly. The front bearing had fresh grease... I picked up and engine Wednesday and Mike said they (M-1009) are almost...

New Jersey Is that whats called a New Jersey Fishing trip? Thanks for the video!

Very good Alot of good info.... I Have to modify the engine crate, buy a fuel pump and starter....hmm I guess my curiosity about the condition of the motor might have to wait for a long time.....untill I need it. :cry: Thanks for the great info.....as always SS is great! :-D I was hoping it...

Only bidder... I bid $150 and won.....comes to $177 with tax and %10... I will spend at least $120 in gas too...... and 10 hours of my time...... NOW its getting expensive! What's it take to test run these?

Well I won and 6.2L engine from Jefferson City..... Anybody wanta haul it? Maybe your gonna be there anyway? I do have tow bar available if you need to tow home you CUCV... Maybe you bought something else, room in the back? If I drive down I will have room in trailer for another engine...

Where did you buy Aervoe? Big $$ Thats stuffs good but expensive.... WHat did you pay per can? I've been using the Wally world Camo paint....Will post pics. I did paint in the wind....and it does affect paint job.... The imperfect paint job kinda adds to the camo affect though... I'm...

Thanks for the Pic I dont need the close up... Nice truck!

I have terrible luck searching for posts and pictures on here.... I'm wanting to mount my Hi Lift Jack inside My M-1009.... Outside on front guard would be ok, accept for the salt in the wintertime. Anybody have pics to share?

Yea great lights I wish I could see it some night.....Maybe look kinda like close encounters movie....Alot of light!

Learning on the fly I learn alot every day. I am thinking I'm gonna leave the IR lights alone. I'm leaning towards a 24v light like NAPAs Lamp / Utility, Par 46, Rubber, Tractor & Utility Lamp; Round; Bulb Then when I want the IR lights, I'll just swap them. Kinda expensive....but I can...

Did I read somewhere, somebody had but clear lenses in their IR light housings? I got my IR lights (thanks CARNAC!) and am wondering if I can mount them and use clear lenses on them, then put IR lenses in when needed...... Or would I be better off just buying some quality HELLA off road...

I have same thing happening.... At start up, the heavy load seems to cause slipping. I was going to wait awhile and try Goodyear Gatorback belts...... I've had great luck with those belts in the past. Great thread.....Now I can look at other issues too... My M-1009 is pretty new to me...

YES Lets see mor eof truck! EVERYBODY on here likes pictures of trucks! Please share your new CUCV with us!

My point My original point is this.... If you desire a gasket you can find them.....But its hard. I made mine, and have plenty of gasket paper left over for other projects. I don't want some one thinking RTV is the only option. 90% or more people just use RTV. I have never been one to...