Search results

Did you use wheels spacers?

Also you should connect a clear hose for the return line and start it to see if there is bubbles

If you look at the return line its inside the small fittings connected to it. I didn't think mine had the glass ball at first its hard to see

you can use any fluid cooler you want. There are different sizes and types. I just put on a trans cooler after the stock one and my trans is wayy better it used to get really hot on the highway. i was going to intall this on the other side of the rad next to my trans cooler but i guess its not...

id think you'd want the probe closest to the exhaust port as possible

mine does the same thing and idles really rough. its seems to have how much power id expect so i think im going to get new injectors and check the compression before i get a new pump.

okay i need new oil lines but i was looking at the oil cooler on the rad and it looks like its just a few lines on the radiator not fins or anything. i have extra fluid cooler i got when i bought a transmission that was too small to use. Its a bar and plate style with barbs on it i am thinking...

Is the glass ball in the return fitting? Or u have a small air leak some where. You can disconnect the return line and put 10psi inti the return lines and listen for leaks works really good to bleed the lines when u need too also

I was thinking could u cut off the rubber hose and compression part. Then flare the tube and put a fitting on it? Then use stainless hose and connect it to the rad

I got a antenna kit And it had everything to install it even instructions and the mounting brackets no nutcerts for me!

Did u replace the lift pump?

I saw those trucks too someone has to have one

yes it was clean. i hope it isnt just a clogged injector or something but it is really really slow cant spin the tires in the rain

Okay so my m1009 has always idled rough but lately its gotten much worse especially when its in gear.also I took a 300 mile each way trip this weekend and it was hard starting after I filled up I had to crank it for awhile. So I'm guessin I need to get my ip rebuilt since I just replaced the...

Sounds like u Just need to adjust the shifter rod easy to do from under the truck

Gmpartsdirect.com

Check out trailworthy fab for rims and tires

Mine was the same size as my antenna nutcerts

My blazer does this And my hub is bad. It does the same thing only does it after driving for a bit

I bet the left hub is bad