Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Definitely dismount the tire first. I used a grinder for the same problem. Just takes a little longer than the blue wrench. If you use the geared lug wrench, it might help to put the wheel back on the hub.
Leaf Springs and Air Ride Suspension specialists offering Timbren kits, helper springs, shackles, and hangers.
Have not gotten anything from them, but prices look reasonable for stock springs.
Look on the engine side of the firewall. The steering column is held by two bolts/nuts just below the brake master cylinder. Mine were covered with a lot of gunk. 15MM deep socket should do. Will try to post pics tomorrow.
I have a class A, non-commercial license, no endorsements.. Just need a written and some experience. The written test was mostly on operating a school bus (which is not authorized with this license). Small DL offices may not be up on this license (my first couple of tries where met with stiff...
http://www.performanceparts4less.com/gdcicat.html?partid=335245
fitting kit is $70.00. Usually find remote control for under $100.00. You would also need hoses, if you don't already have them.
Matt,
check the MIle Marker web site for lots of info. Also, feel free to pm me for my phone number. Installed same winch on Number One Son's M1009. Very easy hyd hook up.
The rules for GA are as stated on the DOR website:
"III. Who Needs an IFTA License?
Any qualified motor vehicle engaged in interstate commerce that is based in Georgia and is not IFTA registered in another jurisdiction must register and file reports and payments covering all jurisdictions...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!