• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. DriverSideImpact1008

    Winter is coming...winterizing ideas

    RE: Re: RE: Re: RE: Winter is coming...winterizing ideas Yeah i was planning on using Rotella. Yeah thats right the G 13's...forgot the number... I heat GP's in a fewl cycles...first for about 7-10 seconds...let it cool for a few seconds...then 5-6 seconds a few times letting the plugs cool a...
  2. DriverSideImpact1008

    Winter is coming...winterizing ideas

    RE: Re: RE: Winter is coming...winterizing ideas I was going to check the glow plugs and batteries. And change the oil and put in 10w30. Or is there a type of oil you have found better? I dont have the GP controller hooked up...just a push button bypass. and i can remember right i have the...
  3. DriverSideImpact1008

    Battle Scars

    Oh crap!! You're not having very good luck. You need an aftermarket bumper/brush guard.
  4. DriverSideImpact1008

    CJ-4 Motor Oil

    CJ rated oil is the current rating...it should be good for everything older than current diesels. No damage should result.
  5. DriverSideImpact1008

    Winter is coming...winterizing ideas

    My M1008 starts kinda crappy if its below 60 degrees and takes a lot of glow plug cycling (pugs are new). So needless to say it isn't going to start if its below 40. What are the best ways you guys have found to make your 6.2's to start easily in sub-zero temps?? Please help!
  6. DriverSideImpact1008

    CUCV M1009 (Fuel filter assembly leaking..........

    I have that same problem. Its not a fast leak but it is a little slow drip. Its around the fuel heater usually?
  7. DriverSideImpact1008

    Speed/Gearing/Tire size?!?!

    I was just wondering. I've seen M715's with deuce tires... Although i think they had Rockwell or old M211 axles on there.
  8. DriverSideImpact1008

    Speed/Gearing/Tire size?!?!

    Anyone ever hear of or see a CUCV with 9.00x20 deuce tires?
  9. DriverSideImpact1008

    Speed/Gearing/Tire size?!?!

    That'd be great thanks!
  10. DriverSideImpact1008

    Speed/Gearing/Tire size?!?!

    Thanks for all your guys input! Now I have to do all the price figuring for each option. :?
  11. DriverSideImpact1008

    Speed/Gearing/Tire size?!?!

    RE: Re: Speed/Gearing/Tire size?!?! Hmm...how much did those ground hawgs cost you?
  12. DriverSideImpact1008

    Speed/Gearing/Tire size?!?!

    Yeah i had experiance with an early 700 in a caprice shifted pretty funny. Thanks for the info.
  13. DriverSideImpact1008

    Speed/Gearing/Tire size?!?!

    RE: Re: Speed/Gearing/Tire size?!?! Thanks...yeah the gearing i looked into for the 14 Bolt rear was $800 itself. Plus another $300-400 for the front was just as much if not more than what i think a 700r4 would go for. Anyone have any insight on the 700 trans or perhaps a manual swap?
  14. DriverSideImpact1008

    Speed/Gearing/Tire size?!?!

    I was wondering what the best ways to get the RPM's down for highway driving :driver: in an M1008. I need to be able to drive fairly frequent 150 mi highway trips comfortably with decent mpg. I know that currently @ about 65-70 mph the 6.2 is pushing 3100 RPM's or so. I know thats pushing the...
Top