Search results

i would say no if it didnt pop out you need to check the kicker arm in the starter it is on a corkscrew style shaft and when the starter spins it kicks the gear out o wait a sec is the starter a gear reduction or a direct drive

PN is 23502557 for the gear reduction starter support bracket it is a gm part number i have no idea why they are so cheap but they are good

same engine and the gear reduction is a whole lot better but if you get it you will need to get the rear bracker for it there is a part number for it somewhere on here

there is a good supplier on ebay that sells them here is the linc 24V CUCV DELCO STARTER 10461453 10465015 10479611: eBay Motors (item 360269389521 end time Sep-02-10 14:25:48 PDT)

yeah i did the same thing about the suction hose lol

well there you go it will squel or make a whirrrllllling sound with no power steering fluid in it

does it do it while you are sitting still if so check your radiator fan the clutch might be locked up or it might be loose belts or low power steering fluid

pull the tranny dip stick and check to see if the fluid on the stick has air bubbles in it. If it does that is a sign that the tranny filter fell out of its hole. also check all of the vacume lines they could be dry rotted and the one line that is always missed is about an inch long on the...

take the little cover off there is a little pin that lifts up (it works the windshield washer) it is stuck that is what is keeping from parking lol

also check the starter relay under the dash to make sure it didnt fry sometimes they fry shut keeprong the starter engaged and sometimes the fry open not letting the starter get power

check the output side of the solenoid to see if you get power coming out. When my solenoid went out it would still click but no power on the output. but it could also be bad plugs

mine was having the same problems i sprayed some lithium grease on the gear and on the connections(linkages) and it works like a champ now

now if the glow plug controller card goes out the solenoid will not work

yes it will

ok man just let me know when you are ready

Hey westech i am about 30 min north of macon if that i can get it for you

if you have 24v at the lights what else on the truck that is supposed to be 12v has 24v. my guesss is everything else . i woild check to see if the 12v power block on the firewall isnt hooked up to 24v. I put a picture of the 12v power block on here so you can see what i am talking about the...

i got a station close to me that sell me the off road all the time i run it in my m1009

welcome to the club i live down south from you in the jonesboro/ stockbtidge area

i like the black dash pad and door panels in thae ride i want to do mine like that