Search results

Pretty sure air is coming coming out of trailer valve since it blows on my hand when I cap the trailer valve.... I will double check though.

So my 1088 leaks air out of the trailer brake valve lever in the cab when you depress the brake pedal. At first I thought it was the trailer valve itself, so I sourced another one and put it in. Well it leaks just the same as before, anybody had this happen to them? thanks

Quick FYI I discovered, if using the medium heavy towbar (not the one you are describing) it has a multi foot with 3/4 and 1" sizes on it. This setup will fit the HMMWV. However if its a winch model like the pic in this thread the larger side of the foot will contact the winch plate this causes...

You can also change to an MRAP or Wrecker CTIS box in cab which has higher hwy pressure settings, some have also had success (I think) in reprogramming the module to inflate to higher values. There is a thread on SS about it somewhere.

yeah by the time you buy the compressor, brackets, new center console or go with the HMMWV type stand alone unit inside cab you would be at $1000-$1500 approx before you even start the install.....

Like this one... http://www.partdeal.com/red-dot-r-9777-off-road-rooftop-heater-air-conditioner-unit-24vdc-for-hd-vehicles-r-9777-0-24p.html i was considering this option and wanted to make sure I didn't miss anything :wink:

What aren't you using one of the red dot kits from a few pages before in this thread, they are the same price.... Or is that only 'part' of what you need?

I get 10MPG at 60MPH in my LMTV, mine has a 290hp 3116 if that makes a difference. This was calculated on 400 mile trip.

Ok, mystery solved. Thought I would post info in case anyone else wants to know in the future. Auto parts store stuff did not fit, tried NAPA, Advanced and Auto Zone. the right part comes in a spicer box part number 2-70-18X when I quoted this part number to some of the auto parts places they...

Cool! thanks for sharing

My driveshaft and hardware was missing, so don't have the originals :(

Anybody know the part number for these? I have a M998 with 6.5/3 speed and 218 transfer case. Rear driveshaft has u clamps on front yoke going to TC and then it has straps for the one on the differential. I am looking for the straps on differential side. numerous visits to parts stores have...

Btt

For applying the insulator over the doghouse/hump. Any reason you didn't apply from the underside, in the engine bay? I am contemplating this project and that would be easier since you wouldn't have to remove everything in the cab.

Anybody know BrutusM37 phone number? I used him in the past but didn't save number. Cant get him via message on SS not sure if he has logged in for a while, thanks

Anybody able to pickup some Wheel Nets/Webbing and hold for a week until I can get to VA Beach ? Will pay for your time :) Thanks for the help. Derick

Chatter on GP recalling HEMTT vehicles Anybody hear details on this, I read its MK48 and PLS but maybe others too? Apparently they are being recalled by the government.

You want to sell them ?

Anybody know of companies that make these?

I guess no one has done this....