Search results

I have some pins in my M936, I will try to remember to take a photo later and post it.

The Pulse Sensor is used for the diagnostic plug under the dash on the right side. You can remove it if you want.

Welcome to the site.

I used the thick one also.

That is not Tom's truck. Tom's was all black.

Post a photo and I can tell you if it is Tom's.

Welcome to S/S. I have a friend that has one for sale in Phoenix for a fare price. PM me if your interested.

I would say it is a 1985. I have a M923A1 that is a 1985.

I know that is the one. It needs to be the one that is about 2" thick.

You are right that is not the right one, here is the right one Baldwin p/n OB1368 and the oil filter is wix 51970 or Baldwin B96 I have been using them for many years now.

Very Nice!

Looks like it is coming along!(y)

Also you may check the grounding bolt on it.

I went out and took some pics of the fitting. This is what I did. I think I did a post of this many years ago.

I think I took the fitting off and drilled and taped a 1/4"pipe hole. I have tried to find photos of the work and I can not find it. Good luck with it.

When I first got my truck the HD motor on the crane was leaking. I had it rebuilt and after I started using it started leaking again. The shop said I needed a case drain. The motor I have is made by Parker. I put a case drain on it and ran the line over to the HD tank, I also put a one way...

Very Nice!!

Here is what I have and used on my rebuild. Oil Pan bolts 40 lb-ft Intake 30 lb-ft exhaust bolts 25 lb-ft Rocker box covers 15 lb-ft Rocker box bolts 65 lb-ft Head blots 25 then 100 then 200 then 305 lb-ft Rod bolts 75 then 150 loosen then 30 then 75 then 150 lb-ft Crankshaft Main 140...

I just rebuilt a NHC250 and have all the torques valves, if you let me know what you need I can send them to you. A repair manual is very hard to find, may try Ebay.

Here is a link to a good write up on setting the valves and injectors. I think you would use the OBC method. Go down to post #8 https://www.steelsoldiers.com/threads/nhc250-valve-injector-overhead-adjusting.73256/