Search results

Exactly this! 1200r20s in dual configuration actually have higher load capacity and more ground contact area than a single 395. This is what you need in the wrecker application. 1200r20 = 30,440 lb tire rating per axle, when dualled, and a footprint of 360² in 395/85R20 = 20,400 lb tire...

Issue is glow plugs. They pull a lot of juice. If it's a normal start, then you can put one on each BATTERY, on its respective positive and negative terminals, and do NOT use a ground point (although, technically you could use ground for front battery).

Hook it up to your other military vehicle with a slave cable. Problem solved. Wait, you only have one? Guess you gotta get another one. ;)

I searched and didn't find anything on the sizes of the lines. I searched through the TMs, and cross referenced them to GM part numbers and got the sizes. Hopefully this will make things easier for those having vacuum issues.

Any new pics?

Yeah. Especially with the box I'm looking at putting on it. I might just have to do duals. I'm curious what the experience is of people running 1100s or 1200s singled out vs dual 1100s or 900s re: drivability, turning, MPG, acceleration (LOL!), etc.

That's pretty much what I was after, thanks.

Did you notice any changes in MPG, tire wear, acceleration, turning ability, etc?

Why not a 24v 5.9?

Debating on dual 1200s, or singled 1200s with hub flip. Help me make my decision. Single rating is 8200lbs, so still well within the weight handling capacity, even singled out.

Excellent work.

All found in the -20p... Which, funny enough, don't have the bracket part numbers... Must be classified... :ROFLMAO:

CUCVs didn't come with compressors, except the M1010, and you'll get a lot of confused replies. Probably just easier to ask for the compressor bracket for the M1010. To answer your question, you can find the part number in the TM. -10, -20(p), -34(p) are what you want...

Yes. It's the -10 operators manual.

As much as I hate Amazon.... Ordered oil filters WIX filters (some of the best), with O-rings, for like $15... 6 - 12oz bottles of DOT5 for $38 Still working on finding inexpensive fuel line, and redoing the primary and secondary fuel filters with spin ons.

Resistor based vs PWM voltage regulated. It's greek, I know.. I also linked headlights in that post... Skip the H4 housings and LED bulbs and go with LED projectors like I listed.... ;)

Might be state related. Hagerty added towing for my M934, but I had to pay for it...I think it was an extra $150/yr. A friend had Hagerty and they towed his deuce... on a rollback.. Probably violated half a dozen laws in the process.. height, weight, you name it.

Fixed my toe out problem. Created a toe in problem.... :ROFLMAO:

Tenative plan, is to ditch the primary fuel filter, and replace with an inline 100 micron reusable filter, then switch the factory secondary fuel setup into 2 spin ons using the 4770 base. I haven't decided if I'm gonna do a parallel setup with 2 micron filters, or a series setup with 10 micron...

That's what the numbers say. 3rrd Armored, 122th MSB, Foxtrot company. BACKGROUND: VII Corps was given the mission on 19 March 1991 to begin humanitarian relief operations in sector, following their efforts during the ground war against Iraq. The 3d Armored Division was responsible for the...