Search results

If the voltage is high its usually the regulator thats bad. Its on the back and of the alternator and can be replaced without removing the alternator. There are 2 different types and they are not interchangeable. Alternators that say hellas greece and then everything else.

ARB makes a pretty durable pair. The euro versions of pretty much all the H4 housings with the city light bulb locations are thin glass and under-size they dont work.

Most of the stuff is metric. Some of the larger nuts & bolts are sae.

If are lines are torn I wouldnt reuse them. The 12v led headlights work you can cut the wire ends off the mil bulbs and crimp or solder to the leads on the new lights. Email will atpawnking dotcom not allowed to put price in open forum. Will

Do you need air lines too I have a parts tractor.

I have reasonably priced motors 225 and 290 hp

The off road thing was probably part of the deal made between GP and dla to allow sales of humvees that until that point were only sold for scrap with a destruction requirement. GP gets to sell trucks, the gov gets money and a bunch of civilians get to run around in humvees. It's a win win for...

Its only an air service brake on those and they are every bit of 6000lbs when loaded. and its not exactly the most balanced load. Other than the trailer frame pretty much everything on it is aluminum and some stainless on the cooking stuff. Back when I was getting 1.30/lb for alum I was slicing...

Should blink with the blinkers or hazards on

Markers yes. Front blinkers not usually unless you are using blinker or hazard.

You put a caging bolt in the hole back of can and use it to compress the spring. You can replace the air lines in place. If you have good screwdrivers sometimes you can tap a flathead into the threaded piece broke off in the chamber and walk it out. The snapon screwdrivers with wrench spot below...

I have all the parts for that

In the area of the air tank drains but in and under a bit. Common failure item.

Probably the ppv on the truck freezing up. See if the horn and wipers work when it's building over pressure. The governor is past the ppv so if it's frozen then the governor can't do its job. Will

I have ones that are supposed to be for the m915 series. N1128 model 24v 140a and 12v 50a.

What were you planning on using as a tow vehicle?

You will have to get the U joint tool and pull both driveshafts if you want to flat tow. You can pull the rear axle shafts and lift the front with a wrecker. How far do you want to go? Might be cheaper to pay a hd tow company to move it, if its a short distance. What are you planning on using to...

Rancho makes some longer offroad shocks. If I remember correctly the Lmtv Shock is around 36 inches extended and compresses a decent amount. The prices weren't bad I was going to measure the mount holes and see how large the rancho holes were. Never got around to it I just swapped shocks off...

The door lock mechs are few and far between. Are your brakes caged?