Search results

What a great find and nice looking truck!!!!

Looks Good!!!

:clinto:

It is my understand that the 10,000 lbs is off road and the truck can carry a lot more and going slow on your farm you could go 20,000lbs I would think.

I have been putting coolant filters on my trucks, do they help???? But it makes me feel better. LOL

I think it may weigh about 300lbs. If you need to fix a lot of rust I have a cab that is in good shape, just a lot of paint on it. PM if you are interested

Welcome and hope to meet you.

[thumbzup]

Yes it is up and running. I did the charge myself.

No it was not custom built, It is a Red Dot condenser that was built for the M939's. I got it from Suprman here on Steel Soldiers. I did not use the one that came with the Hummwv kit. You need a compressor mount that is built for the 8.3 in the A2's. The kit cost a lot so they are trying to get...

Farmallmilitary, Thanks for the info. I will try to close up the cab a little more.

One thing I do know is that you can be 180 degrees out. When the lines are lined up on the pump the motor needs to be on number one cylinder. The motor turns over two times for the pump to turn over only one time.

I looked at my LO and it reads 10w for the trans. and you are right on the power steering. But you need to look at it to make sure it is oil and not Dexron III. I have a m936 that came with Dexron in it.

1. 15/40 for sure, the 10w is for the Transmission. Look at the Lube order TM that will help. 2. The petcock on the bottom is for water drain. 3. You may have an inter axle seal leaking. 4. If it is not dripping out I would not wrong about it. If you have an MV you will have oil leaking...

Have not done a lot of testing, but it keeps the cab at about 85 when it is 105 degrees out. I need to fix some holes in the firewall, a lot of hot air comes in from under the dash. Also the heater fresh air vent lets in some hot air. When your driving the AC does not need the fan much.

I have completed the AC install in my M936. I used a Hummwv kit but I did not use the Hummwv Condenser, I used a condenser built for the M939's. The big problem was I could not figure out how to get the motor fan to work with the AC system when it needs it and also have it used by the truck when...

I saw someone here on SS that was parting a 250 some days back, but I could not find it. Post a WTB in the Classifieds and see what becomes of it.

Try this number, P/N 208087, t is a Cummins part. I found it in the Cummins parts book.

Thanks I was thinking it was something like that. I guess I will need to do the conversion. Thanks again!!!

I have a question about the output of a MEP-005A. If you hook it up to Signal phase and try to use it will it shutdown due to not having the one leg with a load on it? I see that people or doing the signal phase conversion, is that needed to run or is it to get the full 30k watts out of the...