Search results

https://www.autozone.com/cooling-heating-and-climate-control/water-pump&filterByKeyWord=water+pump&fromString=search&isIgnoreVehicle=false This is a prime example of price gouging. The A/C Delco water pump is over $200. and has a limited lifetime warranty. The Duralast is limited lifetime...

This needs further consideration. Many issues were discovered. Be safe and Take care.

No words to describe the horrors I seen. I contacted the owner and we discussed this situation a bit further.

How do you move a CUCV pickup when you don't have a lot of room and just want tit closer to the garage? With the Honda tug. It worked and I don't need anything fancy. I thought about the Kubota but this was out and I thought why not try. Never seen that before. Be Safe.

Very nice. Now grease the cable and slide area. That will wear and break if it is run dry. Use a finger tip of wheel bearing or chassis grease.

That ain't working. That's the way you do it. Main bearings for nothing and the grease for free.

https://www.steelsoldiers.com/threads/injector-return-hose-side-by-side-comparison-tygon-silicone-viton-etc.138997/ I thought we had all this covered in the thread last week.

I do work at salvage yards from time to time. Many vehicles are branded never to be returned to road use again. Personally I like that on the newer vehicles because I feel bad for the unsuspecting buyer that buys a one-three year old vehicle that was totaled and rebuilt. All vehicles that are...

Remove that piece and toss it. That was a piece they put on the hose so it fit on the valve one way. Easy to remember top T to transmission and bottom B to back of motor. That rubber block made assembly idiot proof. It does nothing but make a leak when cracked. Good Luck.

I also want to add she told the guy all about the starting and how much we cared for the truck. See also told the guy she wanted pictures of it sitting in New Jersey at the exporter. By 1:30 yesterday we had pictures of it sitting at the exporter. The guy that picked it up was impressed with the...

Yes definitely check the drag link and the tie rod ends. My Son had a lifted M1028 and had little trouble running 40" tires out the turnpike for a few years. Once I located a pile of HMMWV 24 bolt tires on wheels he ran them. Even with the run flats in I never noticed steering issues. That was...

That bed side is open up to the rail. And the other great part is the bed side is bolted on 99.9% and only welded in the rear. If you wanted to you could take it off and fix it. I done that to a few as I was rebuilding them. That made having the bottom floor and front wall mush easier to handle...

That's an easy fix. The matching of the paint is simple if you have the paint colors damaged. But camouflage is not really that hard to match. A new bed for that little damage is like when the military replaced the CUCV engines because the rear main seals were leaking. Back in the early 80's...

I did not make the shipping arrangements. I just had my Wife give them the truck when they showed up to ship it.

I was able to get the engine turned over enough to get the 6 torque converter bolts out. I don't know if I had to remove as much as I did. But when I was under there with a cordless ratchet and impact I took out every nut and bolt I could and was able to rotate the engine enough to get all 6...

Full report. The M1009 has arrived in Jersey at the exporter. I was told they are preparing it for shipment. That's about all I can do at this point.

And Just Like that the CUCV M1009 was gone. On it's way to a new home in Germany. My Wife also included special starting instructions in hopes that care would be taken during it's voyage. Good Bye.

First check the vacuum hoses and make sure the hose is still connected to the modulator on the passenger front side of the transmission. If still connected check the vacuum block on the shift modulator of the injection pump and carefully inspect the hoses connecting there. The long one runs back...

Good News. Glad things worked out.

Well I couldn't wait to onto the diagnostics of the M1008 locked up engine. I tried the flywheel tool and the 24MM socket on the main crank pulley. Tight. Locked up tight and won't budge either way. So I think a moment and look up in the bell housing. I could get 4 maybe 5 of the torque...