Search results

I just want to THANK everybody for making this a SUCCESSFUL meet, great, and eat, had 4 trucks and Swiss 1009, a BUNCH of GREAT people, Hope we can do it again, Thank You all for making this a SUCCESS. As far as the 819 goes, I was rolling though the light in 3rd, went to shift to 4th --...

Home with two FRONT yard works of art, m62 acting like a bad coil, loose wire in distributor, bad hot wire, the 62 when it was pulling the 819, did not even grunt, then she died just like you turned the switch OFF

Mr, T, anybody can have a old tank, you have TiggerGF, so quite your betchen.

GREAT, you guys are always welcome, leave room for some good home cooken food

I am sorta posting, not knowing what tools he has, the bare minimum for what he needs to get going, he has anything more is a +.

Then the other person in the picture MUST be WM. :wreckerman893:

hes, it comes off

If you have to put a hole in the fill screen, do it so you can get hose to near bottom of tank.

put one end in tank fill and tie off, other end clamp to in fitting at filter I would use one of your trailer air lines as a temp hose.

Bypass all your fuel lines, run hose from left tank to filter

Should be vents

Wish we could get it closer, have to see as time moves on.

Would you be coming down 75 ???, if you were doing 75 which is 2 hours from the house, then meet and bring the bed here, Kenny has kin about a hour north ??? Could the bed be come-alonged onto another trailer ??, not worried about hurting the bed, worried about tearing up the trailer.

Let me tell you something, to YOU my statement may sound silly, ect., There are a lot more at stake then red fuel, this hobby is on a very thin line, everything from pulling ALL regs. to OFF ROAD only, to parade only, it happened in one state already, the law got changed though the HARD work of...

Anything CAN be broke, just depends how it is used, some of you know what power dividers are (they connect number 2 and 3 axle on a civi 3 axle truck) it has really thick gears, you would think they would be impossible to tear up, yet I have repaired quite a few, and EVERY time it was lead foot...

ONE thing a lot of you guys that are trying to get around the red dye laws NEED to remember is , We in Ga. as well as people in other states ARE trying to get MV friendly laws passed, other people (yes not only MVers follow SS) read about how to get around THE LAW or INGNOR the LAW, WILL NOT...

As of right now, we are still on for Saturday and as far as I know, I do not see any reason to cancel unless HE$$ freezes over, Hum maybe that was not the best choice of words right now, And yes COMEBACKS are not good, most of the time only happens once, then the truck GOES to a different shop...

Ask me how loud a straight piped non turbo 250 under load is ???

Are the NSNs the same in the -24 p, if they are then the trans is the same.

pm inbound