Search results

I think 4 3/8 and 4 7/8

That would work, though not sure about towing another truck that way, might want to push to the raised axle side,

WORSE case use a hammer/chisel, not correct but works in a pinch, always can replace the nuts later, if it means not getting the truck to point B or betting it there less a part that can be fixed a point be, I would rob parts

Suggestion, jack up the 939, pull the had hub, pull a good front hub off the 923a2 and install on the 936, LIFT tow the 923, this ALL could be done with hand tools in about an hour or so.

There is a kit in the back of the -10 along with the other add on kits, or instead of a military kit why not just put a standard civi kit which can be gotten from/ordered from any big truck parts house, or napa truck, the plus side for this is that it may be cheaper then the military one. These...

If you do not have a alcohol injector for your air system, install one, this WILL take care of your air system freeze up problem and add the checking and filling to your walk around..

BLOCK the wheels, do BOTH sides of the blocked wheel AND do more then one wheel, even on a flat surface the truck at time, wants to move a bit when jacking.

Gauges fried, senders should be fine, I managed to fry a few by getting wires crossed behind the dash

The second is for a dump control or wrecker power divider control lever mount.

There could be a problem with using 5t DEsplined caps, on the deuce spindle there is TWO bushings in the spindle to support the outer axle so even without the splines in the cap, the axle pretty much stays were it is, on the 5t spindle there is only ONE bushing which is in the back right at the...

And just WHERE would that be???

George KNOWS these old parts in his head, he does not even need to look things up, he also knows what will work better then the called for part. I like talking and doing business with him, he is what ALL the old time parts guys were like, none of no p/n no part, ect,,

ICE is for KIDS, real MEN do it on the DIRT with 36.000 lbs.

What I am trying to find out how the lower lift bracket is related to the spade pocket bolt pattern, does it use some of the same bolts as the lower bumper mounts like the older 5ts or ?????

Why not pay me to make the rounds of ALL the many sites that you have items that need picking up, as you WIN more, I could extend my route.

You need to look at Steve6x6x6s trucks

If Operation BS keeps getting BIGGER, we WILL need more convoy security

Try George at White Owl, he had everything we needed for the 6602, should have the stuff for the deuce, the cap, router, plugs, wires, points, coil, condenser are the same as the 6602, the ONLY thing different is the distributor housing advance (opposite from the 6602), this makes the housing...

You could install a quick release valve in the air supply line, when the line is pressurized, the valve opens and operates the fan, when the pressure is dumped from the supply line, the valve closes, sealing off the supply line and allows the EXHAUST of the trapped pressure.

Ok here is the list so far for OPERATION BS ANDY3 -- Operation BS Command Convoy position ----------------------------- OWNER 1 -- m1009 ----------- convoy lead--------- Swiss ----- 3/4tcargo trailer 2 -- m38a1 ----------- convoy hitchhiker -- Zout 2 3 -- Proud American - convoy Security...