Search results

Nice paint job!!:beer:

Here is what the RV handle looks like on my M923A1.

This is what I used for my driver side doors. It takes a little rework on the handle but it works fine. I sandblasted it and painted it black. JR Products 10895 Chrome Locking L-Handle Camper Trailer RV :beer:

The o-ring for the A3 is the same one that is used on the M939 turcks. It is a 5mm o-ring. I just changed one on my m923A1. Erik's in CA has them. Or you may try a truck tire shop.

PM 91W350 he may have some used ones. maybe new ones. :beer:

I use a little shop in Avondale, AZ. 623-932-3760 :beer:

Carnac, could you look this M931A1 up for me? Thanks!!! a. C53102938 b. NL0MM1 c. 2320012064077 d. Nellis AFB, NV e. 786QM E00217 113 on the front Was delivered 2-3-86

LOLrofl

No I do not think you need to drain the oil to install the new spin-on filters. But if you changed the filters when you changed the oil I would run them a little to get some use out of them. :beer:

I do not think the nut is Left Hand.

This is the kit I got from Summit Racing. I mounted the tank on the firewall and the hose that comes with the kit is a little short. Wilwood Disc Brakes 260-8742 - Wilwood Master Cylinder Remote Reservoir Kits - Overview - SummitRacing.com

He has the TM's and has read them. He is just asking for help with the winch problem.

Looks like a good start.:beer:

Good job!! I towed a M332 ammo trailer from El Paso and it towed well also. :beer:

I was thinking I read that your not to use low range in Reverse.

Welcome to SS. You need to be able to do a lot of the work your self. I think a truck in a motor pool will brake down more due to all the drivers.

Welcome from AZ.

I mix 50/50 diesel fuel and WMO.

Great job!!!

Yes I did add one to the Trans. I replaced the plug in front on the shafter in the pic.