Search results

Nice looking truck!!!! :driver:

I have towed my 1000gal water trailer. It is about 10k. The Curt 15530 is rated at 18k lbs.

If you run into problems close to Phoenix. I am just north of I10 at mile maker #98 close to Tonopah, AZ. I towed a Deuce with a Deuce and got about 7mph with 50/50 wmo/diesel. But it is slow going up hills...........:driver: Good luck!!

I used the Curt 15530. The 15605 is a 2 1/2" receiver tube. The 15530 that I have is a 2".

Two group 31's or 27's will work fine.

The front brakes do not have spring brakes on them. I would try to get air from the Semi truck or get an air compressor to air the truck up or Cage the brakes. Good luck and be safe with the brakes gaged!!

Thanks for the info.[thumbzup] I guess the trans shaft is what I was trying to grease.

I went to grease my Throw out bearing and as it turns out the grease fitting is facing up.:-( Is there a way to rotate the bearing so the fitting is facing down with out pulling the trans? Thanks!!

My dad used a high-lift jack to dismount tires.

Nice looking truck!!!

Nice job and thanks for the info. and pics!!!:beer:[thumbzup]

Gimpyrobb, WOW I read all the post I could find and I also looked at that attachment and I missed that. THANKS!! I guess the fuel is turned up on the IP pump. :beer:

I picked up a used IP Pump and I would like to know if you can tell if the fuel was turned up on it? The little cover plate did not have any safety wire on it. The adjustment screw is out like a 5/16"-3/8"

Nice job!!!!:driver:

Beerslayer, Thanks!! I got the switch from John at JATONKAM35s HOME ON THE WEB. He is a SS guy. Just ask for battery disconnect switch. I think it was $65.

Here is what I did to my M923.

I think that would be a fun class to take, good luck and thanks for the pics. :beer:

I would use 2/0 or bigger and put it on the Neg. side. I just installed a Battery discount switch on my m923 and will be doing my M35's also. I used 2/0 copper welding cable. I had some damaged cable that I cut some good parts out of, works great.

Nice job!!:driver: Glad you made it home safe.:beer:

I use Rotella 15w-40 also in my Deuce. You will need about 21 qts. Go to Walmart for the best price. You need the LUBRICATION ORDER Manual LO 9-2-2320-209-12-1 YOu can get the manuals from this site for free. http://www.jatonkam35s.com/jatonkaM35sTMdownloadpage.htm