Search results

take the weight off the front again and grease the upper and lower king pins. have someone turn the wheel back and forth while you're putting the grease to them. i mean GREASE THEM.

look up hunter heaters and you get find some decent size heaters for construction equipment. esp. catterpillar equip. all are 24 volt too.

i,ve been using the 2 batt.setup for the past 5 years and no problems yet. watch ,they'll call me to go plowing and it won't start.ha ha

mine was leaking too. i put silicone on a screw and stuck it in the hole, no more leak.

thts cool . my buddie had three of his trucks in the movie( the box) with cameron diaz and got paid $500.00 each.all they did was eat and the trucks were used for about one hour.

hey guy, started having directional problems myself and found if i put the switch on and move it back just a little bit the directionals would work.guess it's from letting the little guy play in there.

the problem is'nt your pressure, it's you're tanks don't hold enough volume to fill air plow piston. if you pipe in one of those tanks off a tractor or big dump truck you will have plenty of air to lift you're plow.but even those trucks had trouble building air when you lift the plow two or...

RE: 5 Ton Winch on Duece? if you grossed out at 30600 lds with a deuce, when you kill somebody and you have to give everything you own ,and will own to the survivors, then you really will be crying.

hey, i used to pull a 1962 autocar ten wheeler dump truck every morning to jump start it .cause it didn't have a starter. oh did i mention i used my 1966 ford galaxie convertible ? you can pull anything

one of my buddies sunk his duece , i mean sunk his deuce up to the running boards in a neighbors back yard ,doing him a favor,anyway i wasn't around and another buddie has this 1962 jeep fire truck with an 8000 ld ramsey on the front.well ,they chained the fire truck to a tree, and used 1 snatch...

RE: Re: RE: NON-blinking blinker i been having blinker trouble from day one . drive it down the road , hit some bumps and everything works fine.tried all the grounds but still a mystery.might check the blinker fluid next.

find a GOOD welder and let him zap it for you ( A GOOD WELDER)

wouldn'nt it be easier to splice it into one of the circuit breakers on the firewall?

11:20's should be around 70 lds. running them soft will make them heat up and possibly blowout.plus they recomend stopping every 4 hrs. to let the tires cool down. good luck

to rebuild it will be around $250- $300. new one is about $500 plus

switch it with the passenger side,which hardly gets used

RE: Re: RE: Trailering a deuce if the dot cops were doing their job that guy would'nt be towing anything else for a while. jail time

sam winer has blower motors for $ 25.00

i don't know about that, when i go out plowing and push back intersections i always go from reverse to second and second to reverse, been plowing now for 5 years and ain't had no trouble with the sprag .as long as you here the sneeze when you hit neutral is when the sprag changes . :driver:

forgot to answer you , on the firewall above the flasher you'll find two circuit breakers. you can find plenty of power.