Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
The m809 series trucks with the nhc 250 can run on essentially anything petroleum based as long as you have the correct ratio to get it to a similar consistency to diesel. Many run used motor oil or vegetable oil mixed into their fuel at a low percentage to lower price per gallon of diesel. Your...
Video would be good. If it is choppy then that sounds like it is starving for fuel but is odd due to it not happening in 3rd when the converter is locked. I do not recommend changing to dextron. 10w 40 engine oil will allow the transmission to last much longer pushing higher power out of the...
It could be shifting too early causing the engine to lug. Try to manually shift it through the gears near redline but let off of the throttle while shifting to not slip the converter too bad. See if it continues when doing that.
You may also have a boost leak causing you to lose power without...
Likely have a shorting wire causing a fault and gets hot. Take all the loom off of the wires and expose as many as possible. Have someone watch closely where the smoke is coming from while you start it up and you should be able to locate the bad wire/ module. If you have a more detailed symptoms...
If your really good and patient you can get $150 a tire with wheel. Likely more around $300 with wheel average good price. Ken Spencer on the m939 facebook fourms is a good source.
Never seen them. Also a 395 is about the biggest tire I would want to change on the side of the road by myself. My m932a2 on 395s goes about 68-72mph top speed with governor adjustment. Not too bad on the highway and dont lose power. If going to turn up the engine in the future 16.00 are going...
@Elijah95 has a youtube channel that can help you with your MTVR on things that aren't in the limited TMs avalible check out "The MTVR Channel" on youtube. Second, doors are currently being worked on being manufactured by multiple parties on Facebook Groups trying to replicate them. Patience or...