Search results

don't forget the left side nuts come off turned right aua

it looks like a flasher unit to me , the old three prong ones. or it could be one of those alternating flashers,wig wags. being on a fire truck that is probably one or the other :driver:

you just overfilled the thing ,once the anti freeze is in the elbow ,thats it needs room to expand .don't mess with the thermostats until you run it with the right amount of antifreeze in it.if it ain't broke don't fix it :driver:

man if that 5 ton had a winch i would have thought someone stole my beast :driver:

you guys are lucky you solved the problem. i've tried 3 different governors and my pressure relief still blows off while i'm driving. finally put a little valve in the line to drain off the extra pressure. aua

my 6602 runs 50 lds running 2000 rpms and a little over 0 at an idle. been like that for 5 yearsand 3000 miles now. :cookoo:

you guys got it made. here in wonderful taxachusetts i pay $450 for # plates and $1900 for ins. all i do is putt around , run in parades,& plow snow for the town. :driver:

mine did the same thing in the 4th of july parade , took the master cylinder apart cleaned it, :driver: and put it back together , been fine since.

any hand soap works wonders with rubber :driver:

RE: Re: RE: Re: RE: 6 Wheels vs. 10 WheelsthereT you get a flat with singles and you ain't going anywhere, with duals you got 4 spares. :driver:

anyone going to the rochester, ma . show aug 18 &19 ?? part of the rochester county fair. trucks will be out back where they have the tractor pulls.look for the beast and say hi . :driver:

coud be yes, the last parade i was in my brakes started dragging and would'nt release .took the master cyl. apert and cleaned it , and put it back together ,no problems since . :driver:

here's a quick fix ., in one of you're original lights pick a spot and heat a nail the same size as yor wire and make a hole run your wire into the hole and splice it inside to the tail light wire silicone the hole afterwards . need a plate light with a #57 bulb that you can take out and...

going up early sat morn, family stuff rest of weekend aua

hey nice unit ,hope to see you at rochester fair aug 18th :driver:

don't use pipe wrenches ,they have a tendency to apply uneven pressure on the two halves.my buddie got some wrenches from ford to remove fan cluthes and the biggest one fits the compressor flanges like a glove. someone on ss is selling them and it's worth it to pick one up. aua

RE: Re: RE: 5 Ton Power Steering Question tell you what guys,i got 30 wght in my power steering and when i got to plow and it's 20 degrees out ,i gotta sit there and let the thing warm up so i can steer the thing :beer:

definitely new tubes in the front, a must for a piece of mind at the least.if they don't leak use them on the rears :driver:

get a couple of 12 volt horns from a junk yard .blow you're ears out .you just have to replace them fairly often when they stop working . :driver:

myself and my bud do the middleboro,ma parade the past few years,then the 4th ,then veterans day ,people love the trucks and we have a good time. :driver: