Search results

Have a safe trip!!! Good road trip. If you have problems I am west of Phoenix along I10, exit 103 close to the TA truck stop. :driver:

Has anyone used 14.00R20 tires on an A3 and will they work ok? What is the difference in the two tires? Thanks!

Glad you made it home ok with the problems. Great write up and pics, we always like pics. It was great that Chris loaded things for you. He has loaded things for me as well. :beer:

Good job!!!:beer:

Some GREAT guys here on SS:beer:

I think if you can hold your hand on it, it should be ok. My hubs run about 130-140 degrees in summer.

Welcome!!! A lot of helpful people here on SS!!!:beer:

Karl Kostman, Here is a post about cooling system filter. My post and pic is post #30. http://www.steelsoldiers.com/deuce/64418-deuce-cooling-system-clean-out.html

Again thanks!! I think I got it this time!!!

My A3 does it also and one of my A2's does it as well. I have lubed them, but I may try to Lube them with the tires off the ground.

Nice!!!![thumbzup]

Good catch, Got it changed Thanks!!![thumbzup]

My pto was leaking a little at the seals so I pulled the pto and replaced the seals. I took some pics to help others with there seal replacement. It was not to hard to do, the nuts that hold the pto to the trans can be a pain. I used a two lip seal for the shift shaft (National #471538. You do...

Great road trip and adventure.[thumbzup]:driver: Can not wait for all the pics!!

Heavysteven, Thanks for all the P/N!! Also thanks guys for all the info.

Dave, Thanks for the info.!![

Doghead, As always thanks for your help!!! :beer:[thumbzup]

Doghead, Thanks!! But what ferrules do you use? Will the ones from Hone Depot work?

I know I have seen a number of fuel line threads, but I went to Napa today to get some fittings to bypass the cold start system and all they had was this. The compression farrule is built into the nut. Do you think this will work or have any of you guys used this type before?

Nice nice job!!!! Looks great!!