Search results

I did find some couplers from surpluscenter.com, Thanks!! But I do not know the displacement of the pump. Also do you have remediations for the pressure relief valve? Thanks!!

What a great trip!!!!

The first filter (Left side) is a 30 micron, I got the housing from Lowe's and the filter from SS Kipman. He had the filters for a $1ea The 2nd is a 10 or 16 micron water sep.(same as wix 24027) and the 3rd is a 2 micron (napa 3674 or wix 33674) I was thinking about the centrifuge also, but...

I got the idea from some threads here on SS. Thanks!

I understand now!![thumbzup] The first filter is a 30 micron, 2nd is a 10 micron water sep. and the 3rd is a 2 micron. See that what you are asking?

Frodobaggins, I guess I need something that can fit the spline and then maybe I can put a pulley on it. Not sure what I need for a drive system. I did have a peace of hose and a hose clamp that I used to test it with a drill motor. But I do not think the drill would last long. Thanks!!

I almost got my WMO filter system competed. The pump and one filter elements I got from Kipman. I test ran the pump with a drill motor and it worked great, I got 5 gals. of filtered wmo in no time at all. Just need to find some way to power the pump. The pump has a 5\8" 9 spline shaft on...

Great job!! Can not wait till you get the other colors on it.[thumbzup]

Besure and check the oil about 1 min. after turning the motor off. If you check it later it will show way full, due to the filter drain back. Just something to think about.

TM LO9-2320-386-12 says 21qt dry and 19qt with filter.

Thanks guys for checking!!!:beer:

It is always hard to sell something you really like and do not want to sell. But you will find a better one.:beer:

:ditto: That is what happen to my. But I think I like to drive the A2 a little more then the A3. But I like anything that is Green or Tan...:driver: I have not worked on the A3 that much but I know there is tons of spare parts for the A2, the A3 is a little harder to find some parts. Welcome...

I have shot at Camp Perry in Ohio and it is not a dry heat!!!:beer:

Rustygears, Thanks for the info. and help!!!!:beer:

Rustygears, Do you have the Napa number number for the Internal Oil Filter and gasket? Thanks!!

I was at Barstow Truck Parts in Barstow, CA back in April and they had 5 or 6. Two or three were not to bad. 760-256-1086 Good luck!!

Rustygears, Thanks!! Did not know there was one inside the Tranny. Will have to find that P/N I guess. I found the P/N and gasket p/n, eriksmilitarysurplus.com has them. [thumbzup]

kilness, you said you changed the filters, is there more then just the external filter for the trans? Thanks!!

Welcome from AZ!!!:beer: