Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I replaced the brake switch under the dash, still the same, 55mph at 2,300RPM. I know for sure now that it's actually shifting in overdrive so my guess is something else electrically is affecting it from lock/unlocking the torque converter, the speed difference is only 5mph, it use to be at...
I cleaned all of the connectors, now it shifts perfectly fine up to overdrive, it won't go into overdrive until I completely step on it up to 3,000 RPMs. 1-3 gear shifts flawlessly though. I'm assuming like RWH said, the TPS, does anyone have a good explanation on how to adjust the TPS or is it...
Yea I have this same fan, for me it's much better than the original cadillac valve setup, especially going uphill. I know people say these engines can run hot, but these 6.5s are not no cummins or duramax, the 6.5s are well known for a high failure rate of overheating and crack blocks. I also...
For some odd reason my transmission is popping in and out of overdrive, it act as if it don't know what gear to go, the only way it won't do this is if I get up to 60Mph or really put my foot down. I've done a little research and see people say about some throttle control issue or the TCM, I'm...
Got a hose made at the local hose shop, they got me some really good high pressure fuel hose, definitely much better than the plastic hose on the truck and the hose that I got from napa to use with the ferule fittings.
I was going to write a new thread about this but I figure this would be a great place, I've been running the super singles on the M35a2 for a bit and here's the difference for me (Pros and cons)
Better cruise speed 55-58Mph at 2200-2300 Rpm, much safer than the 45-48Mph on a 70Mph freeway that...
Could be 20k hard miles, my broken speedo had around 3.5k and the hours was around 300 if I remember. My transfer case and transmission looked clean but the ball joints look like they seen better days, the radiator looked like someone got in a fist fight with it, the transmission wiring harness...
Does anyone know if there's a particular way to find the actual mileage on the humvees? I'm assuming there's some sort of scan tool that be plugged into the 4l80e possibly? I'm just a bit curious to see how many mines have since I've been driving the truck a lot. My old Garmin GPS said I drove...
I'm currently on the last part of bypassing the FDC which is routing the hose from the back of the filter to the hydrualic head but for some reason, I cannot for the life of me get the hose to seal up with the fitting, sleeve, and inserts. The question I have is do anyone know if there's a pre...
I know this is a dead and beaten on topic, but has anyone yet recently swapped over to a better overdrive transmission or transfer case that's readily available? If so, please tell us what you had to do and the details to it, how much you had to cut the driveshafts, did you need to move the...
Anyone has the exact size for the driveshaft bolts that connects the rear transfer case driveshaft to the rear axle? I'm hoping I can go to the store right quick and get them instead of ordering some, I lost the original when we removed them for a tow