Search results

I have some takeoff plates... 05-99 = 184xxx 06-01 = 195xxx 01-06 = 230xxx 06-07 = 251xxx 10-07 = 259xxx 02-08 = 264xxx 11-08 = 312xxx 11-09 = 331xxx

It looks like a data plate from the reset, which might be the reset date. This one below is an example of a AM general produced data plate.

The original delivery date should always stay the same.....but some reset places put a new date on a new main data plate when they reset it which is wrong. The new reset date is normally on a different data plate if they did it correct

Easy to see the date code on the back of the motor. Right side below head on block. GEP's date starts as numbers then letters, an " H " for 2001, or J, 2002, K, 2003, and so on.....L, M, N, P.....etc. No code I, or O. So...11 03 L is a : nov. 03 2004 cast date motor.

They are steel...I have some with brackets.

I have one of the Gypsy rack tailgate style available with 2 gas can mounts.

That thing looks dangerous.....all the weight on the bolts in a shear condition...no thanks.

There is no reset.....check them with an Ohm meter. If good, they will read through. Sounds like you need a new box.

I called Melton...they said no chinese blocks.

That one has the hour meter.....most I seen, and mine only have tach.

For the spiral type glass.....:D

Yellow label KDS and SSI box...P.N. 12469158-1 , nsn : 6110-01-470-1931 Green label KDS box P.N. CR2699, nsn: 6110-01-491-2142 White label /Green box: KDS or Nartron P.N. 12480779 or CR-2701, nsn: 6110-01-542-7901 .......................................... TCM : Yellow label KDS or black top...

If all fluids good, batteries good and charging system good....check all your half shaft bolts at brake rotors. Drive 55 -60 max. AAA like Blk Hmmwv said. A good cell phone. If staying in motel....Back up to pole and chain it there, shifter left in gear, dash cable locked around str. wheel. Take...

Needs a harness and a sending unit for that speedometer. I have sending units available.

I have wiper extensions for Up armored Hmmwv's available.

I have the opposite side to that one.

I had some before....Hmmwv, who knows who built them.

I'll have 6 sets...fronts/rears....,3 sets sold already

Making some front Half doors to somewhat match original rears.

Check Rails...some older M/C trucks have cancer in the long lower portion of rail. In fact...an upcoming truck at Barstow shows a pic of Cancer eating through a rail....that trucks junk....to much work to fix that....unless it goes way cheaper than minimum bid.