Search results

I have just about finished my headache rack/ bed extension I made the cuts for the framework and tacked it together with my little welder, then dropped it off for the kids in the welding class to burn together. I am undecided on the deck material, originally I planned to use 1/2" steel...

.............

does anyone know the manufacturer/ model of the deuce injector pump? also is anyone selling new gasket/ rebuild kits?

Does anyone have any reccomendations on who to send a deuce IP to? truck is running great, but I am still putting fuel in the crankcase. I don't want any extra performance, just stop the leaks. Edit: the truck has a "D" block with a "D" turbo

could someone get a measurement of the gap between the bed and the cab on a M35?

Details... best way to contact is via pm.

I pulled down 4 trees in my parents’ yard this past weekend, which gave me an excuse to use the winch a little and practice rigging for different situations. On most of the pulls I used a double line with a doubled 1/2" sling for my attachment to the trees (generally 12' or so off the ground)...

I decided a while ago that my deuce will not be getting “restored” and that all of the time/money I put into it should do one (or more) of the following three things… maintain it, expand its capability, or make it safer. After killing my driver’s side headlight (again) I decided to make...

anyone here near boston that can snag and hold smething big/heavy? (4000-4500 pounds)

Can anyone tell me what this can was meant to hold?

Does anyone have the specs for the bulbs in the rear composite lights? I am primarily interested in the bulb(s) that provide the stop/turn/tail functions.

Does anyone have exploded diagrams of the axles? I am primarily interested in the chunk, but am not willing to pull one, just to look around :wink:

............

Are there any tried and true ways to keep new unmounted tires in good shape?

I was suprised at how fast my truck reached operating temp this morning when I took it for a spin at 20 degrees and am curious how long it takes different trucks to reach operating temp in various conditions. this morning I was at 180 after 5 minutes of idle and 5 miles at 20 degrees. I have...

how do the different types of filter conversions "seal" to the motor? I assume that the OD Iron setup uses the same gasket as stock since it uses modified cannisters. What about.... Jatonka's? Builder77's?

I need to replace the driver's side for the third time :evil: (I have never had to replace the passenger side.) The wiring for the lights doesn't look as if it has been hacked and I replaced all the rubber isolators when I flipped the lights for the winch install. I am leaning heavily...

taken mid swap

Is it possible to replace the seals on the shaft that shifts the pto w/o removing the shaft?

Anything going on with the production/sale of AVM hubs? pics maybe?