Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ok, more trouble shooting at the campsite. The switch is fine with just the service lights. When headlight&clearance lights are on, trips in about 4 seconds, but resets in just a minute or two. Still trips with turn signal connector disconnect and/or headlights removed. And the switch in the...
Driving to PA from MD yesterday and the three level light switch became intermittent after 1 1/2 hours of driving. It would flash twice for a turn then shut off. I was running with all my lights on but when it shutoff no lights works at all. After about an hour of being off it would flash 4...
Welcome to the addiction! For the Gen2 light, check your belt tension and mounting bolts for the alternators (there are two of them). Might as well check the power steering bracket when you are in there. As far as the dash lights, you rotate the headlight knob to adjust the brightness. If you...
I got the hitch from TM America on this site. Excellent workmanship. Add a 12" receiver tube and weld it up. Kit comes with the two large plates and two spacers. Make sure you leave enough room from the top of the spacer to the frame. I clamped mine together first and measured to check the...
Busy day, mounted a receiver hitch, manually activated backup light, pulled the cable from the receiver to the cab for brakes, installed a Dynomax 21470 muffler from Summit Racing. Don't have a DB reading yet but the sound is definitely deeper and less harsh.Curing the paint right now - 10 min...
It is the military version of a jumper cable. There are two kinds that I know of, single round and two pin. I have the single round on my M1009 and M35A2, and I added a plug on my 24V alternative power system so I can either use the M1009 as a supplemental 2000W 24V generator or jump my...
It looks like over a hundred of these have probably been sold in the last few months, and no pictures? I'll be working on the Deuce tomorrow, did some trials this evening. Passenger seat area is out since I am switching to MRAP seats. Right now it looks like it is in the passenger toe kick...
I ran an LMC duct from the air cleaner to the passenger grill knockout a year ago. Biggest improvement was about 3dB in the sound level. A clean air filter makes a bigger difference ;-)