Search results

OK guys when it rains it pours sometimes.I got everything back together went to start the truck I got a clunk. I charged the batteries took them to the parts store they tested them and said they were good.I cleaned the terminals and grounds still clunk.I am not sure if it's stuck or the solenoid...

OK guys have another possible issue.The center part of my clutch disk it wobbles no damage.Should I replace it?

OK guys I am also having to change the input shaft seal and rear seal and inspect gears and syncros .I saw a company that sells an improved input seal has anyone used this seal? It's one of the military truck rebuild companies.

I have the passenger side cupping I saw a thread that exhaust heat can cause this. I eliminated the J pipe and have just an elbow drives side has almost zero wear should I relocate exhaust to the back of cab?My tires are 14.00 20 NATO NDTs

OK I just bought a new NewStar 3 lever switch everything works fine except I have no turn signals with headlights on.I have them with the headlights off.I don't know why can someone enlighten me as to why.I did before?

OK guys I've run into a snag hooking all my connections up. I have an issue where the low beams come on but as soon as I hit the dimmer switch on the floor for the high beams the light switch pops the breaker and no head lights.The high beam indicator is not coming on either.I have all the wires...

Ok my passenger side rear hub was fairly warm when I ran it yesterday drivers side was not just repackaged them and new seals should I be concerned driving to Florida?

Ok been reading a lot of threads on 12v accessories in deuce I just want a inverter type setup that steps the voltage down from 24v to 12v so I can charge my cell and possibly hookup a radio and 4speakers getting ready to leave for florida in a few days so trying to find one I can pickup from a...

Ok fellas tried searching here and net for a stablizer setup perfer a duel setup. Does anyone have links pn#s or pics thanks .

I wanted to make sure I d be safe pulling this trailer with my LDS465 I have a 1985 GMC Suburban 2500 2wd 350cid hitch is rated 1000 tongue# 4000 deadweight# 9500 trailer weight# no trailer brakes.

Ok guys I relocated my fuel pump any thoughts or concerns.

Ok I have an M105A3 bed 49" tires 10" wide and stock rims will not work backspace is to much around 4" to 6" of the tire are under the bed what are my rim options?

I am getting this from the fella I bought my LDS from its a Vickers ram nos. on the tag read *SN 126-JK * part nos. *320A *38AWM *other nos. *NO92-11 this is the only information I have would it work? I have no idea how this type of ram assist works any info on this would help I couldn't find...

Ok fellas going to start my airpack and master cylinder rebuild today.I will make a video I also need to know if red hightemp grease is ok on air side of the pack the military had same grease as my bearings in air cylinder .

I bought an 08' rebuilt lds465 what turbo is on it. Its not a d I have a d??

I wasn't sure where to post this but I wanted to know if anyone in that area does previews at Aberdeen GL site and possible pickup.

I need to know the thread size on the 5/16 fittings.

I wasnt sure where I could find 14.00 20 inner tubes for my NATO NDTs I couldn't get a clear answer searching here on SS Googe or flea bay. I called the place by my house but couldn't justify spending 73.00 per tube any good leads or suggestions are always welcomed and appreciated.

Trying to get the weight in case I have to get one shipped.

Ok guys I have been researching bypass engine oil centrifuges for the last few months.I wanted to do a write up on it to remove some of the mystery behind a simple part and hopefully save you guys some money. I finally purchased one from PAbiodiesel supply. I purchased the 65GPH model I just...