Search results

I took said advise on my leaky fuel lines from the pump to the injectors by loosening the two that were leaking and re-tightening them. That fixed the leaks perfect. Now I have a long start problem. If the truck sits for more than 10 min. or so it will take several seconds to start. Before it...

One of a hundred questions I have about my new M35A2C. I have a new leak around the injector pump and it appears to be injector line related. Do I try to do what it says in the PS mag. or do I replace? I guess it boils down to $$$. One of the lines is leaking at the injector and running down to...

When I put on the turn signal onmy M35 it will hang for about 4 seconds and then start to blink, but, will get faster and faster and then won't come on at all. Plus, when I turn it on the second time it won't work at all. I have consistant brake lights. Ideas? Chuck XD Fan

I noticed tonight that the front rear axle is off center about 1" from the back axle. Is this something that I can loosen everything up re-center the axle and tighten everything down? Chuck XD Fan

Used the search function to find out how the Tx. guy's got thier plates. Some have reg. as "classic veh." but I am being told you can't have them on anything over 1-ton. These are going on M35. Some insight on this would be helpful. Chuck XD Fan

My gear shift has a lot of side to side play in it. I did the search thing to find the thread that was posted on this subject but not successful. There is some adjustment inside the top of the trans but I can't remember what to do. Chuck XD Fan

How much blow-by are you guy's getting from the crankcase breather on your multifuel? Also what is the tube that connects to the metal breather tube that exits near the turbo made out of? I know it was/is supposed to exit down below the frame. Mine is missing. Chuck XD Fan

I need a tachometer cable for my M35 and some direction on how to change it out. Chuck XD Fan

Drove home with my M35 yesterday from Pineville La. Thank you Ken and my cousin. Almost uneventful other than the rain from Tyler to Fort Worth. I will post pics tonight when I get home from work. Made it in at 10:00 last night. Need to know how to change out the tach cable as it quit on me half...

Does anybody run conventional, quality motor oil in their multifuel? I know these motors have been around for a long time. I know that Rotela's and such are the best, but is good name brand conventional oil "ok" for a multifuel? Chuck XD Fan

Anybody have pics or suggestions on how to replace the section between the hood and windshield? I am thinking of changing the name of my truck from "Dixie" to "Rusty" Last name....."Normas".... :driver: :cookoo: Chuck XD Fan

The duce I bought is a good runner but has some rust issues. Nothing for the most part that is not R&R. But the pannel where the hood is attachedup next to the cab is pretty bad and may need replacing. Is this part of the cab or can one be cut out and replaced with a good one? Chuck XD Fan

Did the search thing and couldn't find the answer. I saw a post just recently about the blinkers but I want to make sure that I know what I am looking for. I went and screened my truck yesterday and everthing was good but the blinkers. I couldn't test brake light cause I was there by myself. I...

I just got back from a 710 mile round trip to check on my truck I bought. I fired up after some time with the batteries on the jumper cables and it has a whisler turbo! Anyway, it some rust problems but it runs like a top. My question is this, The air gauge was peged at 120 psi. Is this ok? I...

I wanted to see a picture if anybody has one of the fitting on the end of your airhose you use for your duce. I know there is a place at the back of it but I can't figure out what fitting to take and the legnth of hose. Chuck XD Fan

I am, by nature, not a negative person, BUT... I have called Red River Parts and Equip.in New Boston, Tx. and I can't get a callback. I am going to need two windshields, door handle, ect., ect. here pretty soon. The lady on the phone is nice but unless you are a major buyer of parts you are out...

I won my first M35. Thank you kendelrio for the inspection, it was a big help. I forgot that the pics are on my work computer. All I have on this computer are pics of the oil filters/injector pump.Went down to NAPA today and picked up my recovery parts. EUC faxed, let's see what happens. :roll...

I called my local NAPA store and asked if they could get the stuff I need to pick up a duce. In other words I just rattled off the part #'s and got a yes or no. When it came down to the oil filters I asked if they were the kits or just the filters and they did not know. Not doing this before I...

Ok, I have a list of items to take with me. In know that this has been covered but some of the TM's won't open/download for me. I won't to make sure the part #'s a valid and I need one I can't find. Also, is GL1 15w40 or the 80/90w gear oil? Here is what I got: primary fuel filter PN3511...

So if I see the "brake" light on the dash of an M35 there is a good chance it is a later model truck with split brake system...right? Chuck XD Fan