Search results

:idea:1st get an account on Govliquidation so you can bid. 2nd be prepared to fill out an EUC End Use Certificate - This can take awhile so find someone to help you fill it out properly to move the EUC along quickly. Also be prepared to wait on the EUC once it's submitted - Especially being...

yes heat gun strong degreaser and paint thinner are your 3 Stooges but they work.:roll:

needs the diodes mine did the same thing for a week, so I had it repaired wall lah!:nothingfunny:

hope that's not a 6.0L, my cousin had one and said it ended up being junk - dead before 90k, I don't think Ford even has that engine any more to date.

I beleive the 10 micron is what you want and put it on the original equiptment location. Use the bracket from original equipment to position new system away from fire wall and wires that run by there. I would expect someone to check my answer on electrical but I would "tie it in to the ignition...

Deuce Bigalow

:arrow:I did the same thing kentuckycucv and it works fine

1. Talk to your nearest DMV "SUPERVISOR" - Nearest DMV to your legal residence 2. Use your Active Duty Status to your advantage - TALK TO JAG

nice mod to the exhaust, you know - 2 exhaust manifolds 2 down pipes means give me dual stacks

:arrow:I ended up pulling the instument panel, cleaned all the 194 bulb inserts with a knife and bent the prongs slightly to get a tighter fit when reinserted, used a pencil eraser to clean flex board, tightened the 3 fuel gage pressure connectors and BINGO every light works and the fuel gage...

Pro-King Transmission Modulator Valve Part No. MD-48 TH350/TH350C/TH400; Black/Red Stripe; Small Modulator Replaces Large; 3 Speed; Brass adjustment screw Offer Price: $11.99 Advance Auto Parts Got mine to shift to 2nd at 20mph and 3rd at 30mph But I don't off road hard or tow! Vacuum...

Coal Cracker is correct, it does have an electric kick down switch located in the cab under excelerator pedal, don't worry about that right now. Pull the vacuum hose off the side of the transmission at the Transmission Modulator Valve and see if there's suction. I hope it's your Vacuum and not...

Glad to hear it's shifting good for you. Now that the Vacuum lines are tight if you wanted it to shift even quicker - rotate the Vacuum Regulator Valve on top of the injection pump back toward the cab and you can back that brass screw out (a few turns) at Transmission Modulator Valve. The Stock...

All set now, I had contacts and moderators ONLY box checked

needed fuel filter housing Hey how's your rig running with that Cummins? I miss my Dodge, had the 24v. If Muddweiser is all set with his newly purchased replacement fuel filter & assembly I could sure use your stock one. Mine leaked like something fierce when I got it from GL. I ended up...

Transmission problem Hmmm well check your vacuum lines and the modulator in the side of the transmission. I had the hard line going down to transmission crack, replaced all lines with soft hose for 6.00 and modulator was 11.99 md-48 advance auto parts. There's a screw in the modulator turn to...

Thanks - I am going to do what you suggested and check out this sending unit. :idea:

I am going to check that out Mike, I know it is not broken. I figured it was the eye connection bolted to frame. Thanks for the tip and keep up the great work on here.:-P I ended up pulling the instument panel, cleaned all the 194 bulb inserts with a knife and bent the prongs slightly to get a...

:arrow: Sylvania Bulb Part No. H6054 ST Dual Beam; w/2 Headlights Silverstar High Performance Halogen 19.99 ea. @ Advance Auto Parts, 10x's better than $8 Stock replacements.

:?:Fuel gage shows past full then shows correct amount after sitting 4 days or more. As soon as I turn the key on it then goes way past full. I checked the ground wire that is from sending unit to driver side frame, emory clothed frame eyelett connection and bolt and reinstalled no change...