Search results

Who is coming to Back to the bricks ? I have storage in flint and north of flint I would like to have a convoy type setting. Meeting point will be a property I own in flint twp. I will have a M109 and a M35a2 + M332 maybe more What would you like to do for food ? What times are you...

dont forget the gasket for the top. Its needed as a shim as well keeping the life giving fluid in

How is the middle of the drivers side seat......... I would have chewed a hole in it had it been me.

Guys I dont know what your M109's are but Mines sees 70 - 90 All the time no BS however Its intermittent as I get passed by all the cars and suvs on the highway. My M109a3 goes 45 maybe 50 its really slow as all M109s I do get 16 in the city and 12 - 10 Highway. I have a turbo whistler

well If like I have refrigerator oil by the quart and it SMELLS like hot barf going thru the diesel ........... My peeps asked me to run the deuce so there kid could get to sleep.

are the small trailers like the 101 and the 332 the same as pigtails go ? I have a M332 and someone changed it out for a 7 wire non mil pigtail anyone have an idea how I can get a plug to finish my restore thanks

i have not had a plate fixed onto the truck its in the glove box. historical plate the MI sos told me keep it with me in the truck as there were no mounts and lights for one

the swans food trucks are propane powered diesels there are conversion kits on the web . lit like a reg and air mix gate. In Michigan we have a few LP NG Auto Filling stations like gas stations but for Air gas motors

Chesaning Michigan M57 Sat May 14th Richard E. Rider (****) National Operation Inasmuch Veteran/Troop Advocate VFW Post 6579 Chaplain Vietnam Veteran Has requested MV owners and there trucks to line up at 2:00PM Market Street Church of the Nazarene, then we will be moving to Trinity United...

you can TX me 810-five 77.3524 anytime , I have a easy trick , you open windows front and back of cab , install a HF winch 12vdc or 110v vac . on a strong square tube steel stock then using the chain on trans lid bolts to lift the trans up into truck you need to be level going into the motor...

STOP ! DO nothing till beer is cold , and digital camera is ready to go . then post post post

how about a air powered pump run it off the truck air system Harbor Freight sells one that used 8 PSI its the silver colored pump.

hay dont forget to callme when your back I got the case of beer and a car dolly that the $100.00 m1009 came back on also got my M67 in the mail the other day have to open the wood box I see there about 60ish now

well I had a melt down today. my pump burned up as best it could in a air tight egg. So I cut it up and learned about it. Its a magnetic drive . there is no shaft from motor to the impeller. that was shocking. the impeller is ok the motor is a melted POS that seemed to be packed under pressure...

:beer: To Group 31 May you start anytime anywhere ! cheep

Ok I have read a lot of post on here. Has anyone found a 16inch wheel that will fit the m1009? I'm looking for a simple and cheep rim. I have almost new tires of the 16 inch flavor. As another note has anyone swapped hubs GM 6 to 8 lately?

If you get ham radio licence yes , the radio RT-524 could work but there area others used too

Cooking up a 2011 Back to Bricks does anyone have any input ?

well Id spin the oil out I seen the slime that came from the centrifuge. I'm rethinking filters might not take out all the bad stuff.

all very good info guys thank you all very much. I think when I get a M1009 I will try to make up a divider wall for the cab with a canvas tent kinda thing. I dont plan on keeping the back seat in all the time. The truck looks like a hard-Azz S10 with a +10 fun factor. Oh 73 N1BNC DE KC8DUP...