Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Lost my brackets, fabbing new ones. Then when just about to install the new brackets and the originals showed up!! Yes just like everyone said two bolts on the bottom and drop in on the top.
The nuts are 3/8-24. I may have some square ones if you need them. I'll have to go look. Just ran to the shop,No. I have a lot of 5/16-18 square. Sorry.
A wiring harness front or rear will get you close to your fixtures. then the pigtails go from the harness to the fixture ( headlight black out light etc.) If you look at your headlight bucket, the wires coming out of the bucket are the pigtails. The same for your tail lights. You have to take...
In my previous post I mentioned about the pig tails from the head lights,The Wiring diagram in the post by Rusty1340 shows all the wiring. Each item, the tail lights, head lights,blackout lights, etc, have tails that the harness either from a vendor or a nos do not include. These are available...
The M101 is the trailer that should be used. You should be able to see the item you're towing in your rear view mirror, An M416 is too small to see in the mirror.
AS mentioned I'd keep the 24v I have a 51, I replaced the wiring. If you pickup a harness that's most of the battle. you may still have to replace the wiring from the harness end connectors to the lamp assemblies. I bought all the terminal ends, coupling, male and female caps, and tape. cheaper...
I have a M151A1 in the three color camo, Tore it down to rebuild and repaint back to green. Like the way yours turned out. I hope to restart work on it soon, you know money , work and time issues are keeping that from happening.
I found another shot of the front mount. You could see just under the pulley where the front mount is bolted, that is a bracket from the factory. The Canadian being longer they used the frame to mount to. If you look at the bracket and move forward you'll see a flat area on each side, That's...
I have an 51 M37 and a 54 M37CDN I took a look at both. In the picture is the 51 front mount. (about 6 years ago) The front mount for the 54 is moved forward to the flat spot just ahead of the mounting tabs the 51 uses. There is nothing extra to mount to. The radiator is also moved forward.
When doing the bed and cargo area of my truck I dug this up, Dimensions for the seats and side boards are; Upper board 2 each side 2.75"X77" Headache rack, 2.75" X ?" cut to fit. Seat driver's side 3.5X77" Passenger's side If you have the spare mounted in the bed 3.5"X 61.5" If you don't have...